Manure Pumping Equipment For Livestock Available In Cameroon
-
PremiumManufactured by BBA Pumps BVbased in NETHERLANDS
A multifunctional 6" inch tractor-driven manure pump for the agricultural sector. For pumping liquid slurry, ditch water or simply for irrigation. The B140 is a self-priming pump with a large solids passage, a lot of capacity, as well as significant pressure. Just fill the pump housing with water and the tractor’s PTO will do the rest. The B140 centrifugal pump comes standard with a ...
-
Manufactured by EURO-P Kleindienst GmbHbased in GERMANY
ER3-type centrifugal slurry / manure pump with air-cooled electric motor for stationary use as a chopper pump with mixing facility in pits and other storages.The pump is equipped with a three-way valve to switch between the two possible operations of pumping or mixing. The agitation nozzle is pivotable 270° horizontally and vertically by 60°. Using the agitation nozzle it is possible to ...
-
Manufactured by Cadman Power Equipment Ltd.based in CANADA
The BackPac umbilical system is a highly efficient way to spay manure, with maximum efficiency and minimal soil compression spreading to be done with quickly, and precisely using tanks or with a drag hose ...
-
Manufactured by Patz Corporationbased in USA
Consistently transfers slurry manure long distances – up to 600 ft (183 m)!. Energy efficient – hydraulically or mechanically driven. Manure handling with in-the-barn comfort. Long-lasting, proprietary, oxygen- and ozone-resisting seals (Tundra™ Pro Pump only). Works in conjunction with scrapers, gutter cleaners, skid steers, and shuttle box systems. Up to 180 GPM pumping ...
-
Manufactured by EURO-P Kleindienst GmbHbased in GERMANY
ER2-type centrifugal slurry / manure pump to be powered with PTO-shaft fpr stationary use as a chopper mixing pump in pits an other storages (use only PTO shafts with a shear pin as safety mechanism). The gearbox is designed for an input speed of 540 rpm. The pump is equipped with a special valve plate to switch between the two possible operations of pumping or mixing. The agitation nozzle is ...
-
Manufactured by Nuhn Industries Ltd.based in CANADA
Fiberglass is lighter than steel and just as strong when engineered correctly! On average, the weight savings from a fiberglass tank to steel can be the equivalent to 1000 gallons!. Fiberglass is constructed from resin, hardener and glass fibers; therefore it won’t rust out! Manure is very corrosive and fiberglass is even tough enough to last forever with liquid fertilizer!. Nuhn Industries ...
-
Manufactured by Nuhn Industries Ltd.based in CANADA
The Nuhn Triple Port Pump is an animal of a pump! I've been pumping manure since 1996, and over that time I've operated many other makes of pumps. Nuhn pumps are hands down way better than the competitor. Their pumps are more reliable, have better performance and are user friendly. With the triple port outlet, it uses 100 hp less than a competitor pump to pump twice as ...
-
Manufactured by Teamcobased in CANADA
The teamco pre-pits pump is entirely made of stainless steel, including the ball bearings. It is designed for hog manure and other low-fibre liquids. Its shredding 6 inche impeller is complemented with a 2 inches pivoting stirring nozzle. The pumping operation is done though a 4 inch pipe. Greasing points are located near the electric motor to ease ...
-
Manufactured by Direct Biologicals, Incbased in USA
Pit Digester is a mixture of living microbes that liquefy solid manure in hog confinement units. It is a consortium of heterotrophic bacteria and fungi that liquefy organic matter and help plants absorb nitrogen and phosphorus. Pit Digester contains organisms that function over a wide range of anaerobic and aerobic conditions. The result of the bacterial and fungal fermentation is reduced solids, ...
-
Manufactured by Euromacchine Srlbased in ITALY
Cornell high operating pressure pumps are specifically designed for coarse abrasive slurry applications such as sand, gravel and manure. Cornell manure pumps are iron and ductile iron construction with hard face mechanical seals for extended seal life. Optional materials are available for abrasive ...
-
Manufactured by Nuhn Industries Ltd.based in CANADA
Conventional centrifugal pumps only have one discharge on the housing. That means that for every rotation of the fan, the pump is wasting power by trapping manure and not allowing it to easily get out of the housing. By adding multiple outlets, the manure is able to get out of the housing faster, resulting in pumping greater volumes with less ...
-
Manufactured by EURO-P Kleindienst GmbHbased in GERMANY
ER2-type centrifugal slurry / manure pump with air-cooled electric motor for stationary use as a chopper pump with mixing facility in pits and other storages. The pump is equipped with a special valve plate to switch between the two possible operations of pumping or mixing. The agitation nozzle is pivotable 270° horizontally and vertically by 60°. Using the agitation nozzle it is possible ...
-
Manufactured by Keydollar B.V.based in NETHERLANDS
The mobile manure separator by Keydollar is with its compact design and high capacity the ideal solution ffor dairy, pig and veal farmers that wish to separate their manure at multiple locations or store their slurry in various pits. Additionally, the mobile Agri-XL manure separator is the ideal solution for contractors that wish to separate slurry for their ...
-
Manufactured by EURO-P Kleindienst GmbHbased in GERMANY
ER4-type centrifugal slurry / manure pump to be powered with PTO-shaft for stationary use as a chopper mixing pump in pits an other storages (use only PTO shafts with a shear pin as safety mechanism). The gearbox is designed for an input speed of 540 rpm. The pump is equipped with a three-way valve to switch between the two possible operations of pumping or mixing. The agitation nozzle is ...
-
Manufactured by EURO-P Kleindienst GmbHbased in GERMANY
ER2-type centrifugal slurry / manure pump to be powered with PTO-shaft fpr stationary use as a chopper mixing pump in pits an other storages (use only PTO shafts with a shear pin as safety mechanism). The gearbox is designed for an input speed of 540 ...
-
Manufactured by Beijing Goke Agriculture Machinary Co. Ltd.based in CHINA
Manure Pump 'Mixer' Manure Collect Tank and Fermentation ...
-
Manufactured by Direct Biologicals, Incbased in USA
Sulfi-Doxx is a proprietary mixture of microbes, lignins and oxidative compounds selected for their unique and proven absorption qualities from three domestic sources and one international lignin manufacturer. SULFI-DOXX is a cutting edge product designed to control hydrogen sulfide emissions during agitation and manure pumping, which can results in pig ...
-
Manufactured by Nuhn Industries Ltd.based in CANADA
The Nuhn Lagoon Crawler is an amphibious vehicle designed for agitating lagoons. The wheels are able to drop down, giving the vehicle roughly 5 feet of ground clearance. The unit then drives itself into a lagoon, where it turns into an agitation boat. When in the lagoon, the Lagoon Crawler is powered by a quad port, Nuhn Header Series manure pump. 10000+GPM volumes are used to manuever the ...
-
Manufactured by Euromacchine Srlbased in ITALY
Our motor pump unit combines high quality Bauer pumps with best efficient engines and 100% customizable solutions. The reliability and resistance of this product, combined with our strong structure tankframe represents the perfect fusion to give you always what you ...
-
Manufactured by Cadman Power Equipment Ltd.based in CANADA
Side-Dress Liquid Manure With Hard Hose Row Crops During The Growing Season. Cadman has taken a concept brought forward by the Alig brothers of Ohio to design, build and market a new Continuous Manure Applicator (CMA) which is engineered to apply liquid manure via side-dress to row crops such as corn in fields as long as a ½ mile. The Alig brothers brought their patent-pending concept and ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you