Manure Pumping Equipment For Livestock Available In Connecticut
-
PremiumManufactured by BBA Pumps BVbased in NETHERLANDS
A multifunctional 6" inch tractor-driven manure pump for the agricultural sector. For pumping liquid slurry, ditch water or simply for irrigation. The B140 is a self-priming pump with a large solids passage, a lot of capacity, as well as significant pressure. Just fill the pump housing with water and the tractor’s PTO will do the rest. The B140 centrifugal pump comes standard with a ...
-
Manufactured by Agpro Incbased in USA
Agpro’s® Extractor line of separators is designed to mate with flush operations and provide separation of waste solids without the use of manure pumps, agitators, collection pits or towers. The unit comes with required motors and controls including an automatic on/off switch. Desired power requirements (phase and voltage) must be specified by ...
-
Manufactured by EURO-P Kleindienst GmbHbased in GERMANY
ER3-type centrifugal slurry / manure pump with air-cooled electric motor for stationary use as a chopper pump with mixing facility in pits and other storages.The pump is equipped with a three-way valve to switch between the two possible operations of pumping or mixing. The agitation nozzle is pivotable 270° horizontally and vertically by 60°. Using the agitation nozzle it is possible to ...
-
Manufactured by Cadman Power Equipment Ltd.based in CANADA
The BackPac umbilical system is a highly efficient way to spay manure, with maximum efficiency and minimal soil compression spreading to be done with quickly, and precisely using tanks or with a drag hose ...
-
Manufactured by Patz Corporationbased in USA
Consistently transfers slurry manure long distances – up to 600 ft (183 m)!. Energy efficient – hydraulically or mechanically driven. Manure handling with in-the-barn comfort. Long-lasting, proprietary, oxygen- and ozone-resisting seals (Tundra™ Pro Pump only). Works in conjunction with scrapers, gutter cleaners, skid steers, and shuttle box systems. Up to 180 GPM pumping ...
-
Manufactured by DM Machinerybased in CANADA
Here is the new DM manure pump, the most efficient on the market. Reduce your mixing time with less horsepower with the new 2 mixing screw (patented). The pump is designed to run with a tractor from 130hp to 300hp, try it and you will see, you'll impress everyone who will see you work. A two and four wheel model exist, the latter used as a wall-walker in lagoons up to 16ft. deep. Available from ...
-
Manufactured by Nuhn Industries Ltd.based in CANADA
Heavy Duty Construction: The Nuhn Heavy Commercial Fill Pipe is the strongest built unit on the market. The main discharge pipe is made from 3/16” thick steel, resulting in longer life of the unit. Consideration was taken for 7000+ GPM volumes, and increased fluid velocities and pressures produced by the Nuhn Header Series Pumps. Heavy construction also increases unit stability, and reduces ...
-
Manufactured by Demir Packing & Agricultural Machinerybased in TURKEY
It enables you to discharge the manure mixed homogenously from the manure hole to an intended place. Our conditions like manure holes. Platform on which pump is installed produced according to depth size of your manure ...
-
Manufactured by Hugo Vogelsang Maschinenbau GmbHbased in GERMANY
Optimum use of the impact of direct hosing. Umbilical application systems with no additional liquid manure transport vehicle are highly efficient alternatives, particularly for operations with large fields. Instead of being transported in a tanker, the liquid manure is pumped directly to the field via a pipework system. At the field, the umbilical application system is connected to the Vogelsang ...
-
Manufactured by Agpro Incbased in USA
Agpro’s® Mark IV line of static screen separator units is designed to separate properly diluted and agitated liquid waste slurries delivered by pump. Split screen design affords both flexibility in selection of weir spacing and enhanced clean ability. Stainless steel construction includes body, rear entry chamber and screens. All units are provided with hot dip galvanized support ...
-
Manufactured by Direct Biologicals, Incbased in USA
The species of microorganisms in Sporzyme are selected for their unique ability to produce increased amounts of digestive enzymes and fermentation capabilities. Sporzyme contains four strains of bacillus sp. that facilitate the breakdown of manure created by animal production. These microorganisms are effectively seeded as manure is excreted from the animal and therefore give producers benefits ...
-
Distributed by Sikkema`s Equipmentbased in USA
Sikkema's Equipment handles all of your manure system needs from design and installation to service and ...
-
Manufactured by B & S Research, Inc.based in USA
Odor, flies, and pit pump ability are the most offensive problems related to livestock operations. Our Manure Liquefier helps eliminate these ...
-
Manufactured by DM Machinerybased in CANADA
Here is the DM tranfert pump. Powered by an electric motor and available from 6 to 12 feet. Completely galvanised, it will perform its task for several years without any hassles. The electric motor ( 5hp - 7.5hp) transmit the rotation to the impeller at the bottom of the pump with 2 straps and a steel ...
-
Manufactured by Schuitemaker Machines B.V.based in NETHERLANDS
The Robusta pump tank wagons can be supplied in manuring and transport models. The Robusta pump tank wagon can be delivered with 1, 2, 3 and 4 axle models. The tanks are fitted, as standard, with a rotary lobe pump in combination with a cutting filter for the pump. All tanks are fully fitted out. In addition, various options can be applied. The Robusta is a tank that distinguishes itself as ...
-
Manufactured by Agriprom BVbased in NETHERLANDS
Agriproms’ AG2-type centrifugal slurry/manure pump with air-cooled electric motor is ideal for stationary use as a chopper pump with mixing facility in pits and other storages. The pump is equipped with a special valve plate to switch between the two possible operations of pumping or mixing. The agitation nozzle is pivotable 270° horizontally and vertically by 60°. Using the ...
-
Manufactured by Agronic Oybased in FINLAND
Agronic LP 125 is a tractor-operated two-phase flow slurry pump. A hydraulic pump at the end of a hose efficiently pumps slurry to a six-winged PTO pump which again pumps the slurry forward. Pumping is possible in places which are inaccessible for regular pumps. The hydraulic pump is detachable so it can also be used separately. A moveable and foldable boom unit, which can be used e.g. for ...
-
Manufactured by Erich Stallkamp ESTA GmbHbased in GERMANY
Stallkamp long-shaft centrifugal pumps are heavy duty and are perfectly suitable for reception pits and manure pits to a depth of 6 m. Either with sturdy electric motors (up to 22 kW/30 PS) or PTO-driven, Stallkamp longshaft pumps are a powerful and longlasting centrepiece especially for manure and biogas plants with both fixed piping systems and flushing ...
-
Manufactured by Frans Vervaet B.V.based in NETHERLANDS
Would you like to use sweep hoses with accurate dispensing, no pressure drop but with a cutting device? And are capacity and low ground pressure important to you? Then opt for the Hydro Trike – Umbilical version and a 6 m3 buffer tank. In combination with the manure pump, the buffer tank ensures absolutely precise dispensing, while the cutting device prevents ...
-
Manufactured by Teamcobased in CANADA
About 75% of the power is required by the impeller. The tractor’s hp is transmitted directly to the impeller without going through gears. Requiring less power, the shredding screw is driven by the gear box. With this system, manure is shredded and sucked up in record ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you