Manure Slurry (Manure Pumping) Equipment
-
Manufactured by LJM Lind Jensens Maskinfabrikbased in DENMARK
LJM´s pump programme complies to all demands and we have pumps ranging from size 1.5 to 18.5 kW. LJM pumps are used in storage tanks, reception pits, collecting tanks or similar where difficult media have to be ...
-
Manufactured by Slurryquipbased in UNITED KINGDOM
This is a standard Bauer pump mounted on the front with a 6m whisk on the rear. With 600m of 6" and 400m of 4" this unit can maintain a very acceptable output of 170 m3/hr with an engine RPM of 1450, that's ...
-
Manufactured by LJM Lind Jensens Maskinfabrikbased in DENMARK
DPAS S090 is a small pump and is very suitable for liquid manure and for installations in reception pits and small mixer tanks. ...
-
Manufactured by Patz Corporationbased in USA
Consistently transfers slurry manure long distances – up to 600 ft (183 m)!. Energy efficient – hydraulically or mechanically driven. Manure handling with in-the-barn comfort. Long-lasting, proprietary, oxygen- and ozone-resisting seals (Tundra™ Pro Pump only). Works in conjunction with scrapers, gutter cleaners, skid ...
-
Manufactured by Agronic Oybased in FINLAND
Agronic LP 125 is a tractor-operated two-phase flow slurry pump. A hydraulic pump at the end of a hose efficiently pumps slurry to a six-winged PTO pump which again pumps the slurry forward. Pumping is possible in places which are inaccessible for regular pumps. The hydraulic pump is detachable so it can also be used separately. A ...
-
Manufactured by Lothar Becker Agrartechnik GmbHbased in GERMANY
These submersible pumps are particularly suitable for the transport of cattle slurry with food and bedding remains as well as for pig slurry, sewage sludge and biogas substrate. Feeding of biogas fermenters, filling of manure silos, manure tankers, manue pump and flushing systems. Double face seal: Industrial design, snore mode ...
-
Manufactured by LJM Lind Jensens Maskinfabrikbased in DENMARK
DPAE S100 is also available in 3x230V on request. DPAE S100 is a small pump and is very suitable for liquid manure and for installations in reception pits and small mixer ...
-
Manufactured by EURO-P Kleindienst GmbHbased in GERMANY
ER2-type centrifugal slurry / manure pump with air-cooled electric motor for stationary use as a chopper pump with mixing facility in pits and other storages. The pump is equipped with a special valve plate to switch between the two possible operations of pumping or mixing. The agitation nozzle is pivotable 270° horizontally and ...
-
Manufactured by EURO-P Kleindienst GmbHbased in GERMANY
ER2-type centrifugal slurry / manure pump to be powered with PTO-shaft fpr stationary use as a chopper mixing pump in pits an other storages (use only PTO shafts with a shear pin as safety mechanism). The gearbox is designed for an input speed of 540 ...
-
Manufactured by EURO-P Kleindienst GmbHbased in GERMANY
ER4-type centrifugal slurry / manure pump to be powered with PTO-shaft for stationary use as a chopper mixing pump in pits an other storages (use only PTO shafts with a shear pin as safety mechanism). The gearbox is designed for an input speed of 540 rpm. The pump is equipped with a three-way valve to switch between the two possible ...
-
Manufactured by EURO-P Kleindienst GmbHbased in GERMANY
ER3-type centrifugal slurry / manure pump with air-cooled electric motor for stationary use as a chopper pump with mixing facility in pits and other storages.The pump is equipped with a three-way valve to switch between the two possible operations of pumping or mixing. The agitation nozzle is pivotable 270° horizontally and vertically by ...
-
Manufactured by EURO-P Kleindienst GmbHbased in GERMANY
ER2-type centrifugal slurry / manure pump to be powered with PTO-shaft fpr stationary use as a chopper mixing pump in pits an other storages (use only PTO shafts with a shear pin as safety mechanism). The gearbox is designed for an input speed of 540 rpm. The pump is equipped with a special valve plate to switch between the two ...
-
Manufactured by EURO-P Kleindienst GmbHbased in GERMANY
High Pressure ER3-type centrifugal slurry / manure pump with air-cooled electric motor for stationary use as a chopper pump with mixing facility in pits and other storages. The pump is equipped with a three-way valve to switch between the two possible operations of pumping or mixing. The agitation nozzle is pivotable 270° ...
-
Manufactured by Slurryquipbased in UNITED KINGDOM
Slurryquip recommends Bauer pumps based on the output, reliability and superior build ...
-
Manufactured by Slurryquipbased in UNITED KINGDOM
Tractor gear pump with adjustable cutter flange. Spiral housing of GG25. Suction flange with ribbed inlet and irrotational function. High consistency impeller with blades - 2600min-1. Thick matter impeller of spheroidal graphite iron with hardened cutting edges. Cutting flange made of chromium steel casting. Compact spur gear box with hardened helical angular teeth. Mechanical seal (silicium ...
-
Manufactured by Slurryquipbased in UNITED KINGDOM
Slurryquip have developed a unique remote control system enabling pump and compressor to be operated from the field, providing the operator with a much more controlled ...
-
Manufactured by Mastek Ltdbased in IRELAND
The umbilical method of manure/slurry handling involves pumping the liquid from a liquid storage facility (lagoon or tank) using a high-pressure pump unit, via a pipeline, to a tractor mounted applicator unit. Once the system is set up and the pipeline has been laid, the pump is started and the applicator unit is then driven in straight ...
-
Manufactured by Agriprom BVbased in NETHERLANDS
Agriproms’ AG2-type centrifugal slurry/manure pump with air-cooled electric motor is ideal for stationary use as a chopper pump with mixing facility in pits and other storages. The pump is equipped with a special valve plate to switch between the two possible operations of pumping or mixing. The agitation nozzle is pivotable ...
-
Manufactured by Keydollar B.V.based in NETHERLANDS
The mobile manure separator by Keydollar is with its compact design and high capacity the ideal solution ffor dairy, pig and veal farmers that wish to separate their manure at multiple locations or store their slurry in various pits. Additionally, the mobile Agri-XL manure separator is the ideal solution for contractors that wish ...
-
Manufactured by Agpro Incbased in USA
Agpro’s® Mark IV line of static screen separator units is designed to separate properly diluted and agitated liquid waste slurries delivered by pump. Split screen design affords both flexibility in selection of weir spacing and enhanced clean ability. Stainless steel construction includes body, rear entry chamber and screens. All ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you