Manure Pumping Equipment For Livestock
-
PremiumManufactured by BBA Pumps BVbased in NETHERLANDS
A multifunctional 6" inch tractor-driven manure pump for the agricultural sector. For pumping liquid slurry, ditch water or simply for irrigation. The B140 is a self-priming pump with a large solids passage, a lot of capacity, as well as significant pressure. Just fill the pump housing with water and the tractor’s PTO will do the rest. The B140 centrifugal pump comes standard with a ...
-
Manufactured by Agpro Incbased in USA
Agpro’s® Extractor line of separators is designed to mate with flush operations and provide separation of waste solids without the use of manure pumps, agitators, collection pits or towers. The unit comes with required motors and controls including an automatic on/off switch. Desired power requirements (phase and voltage) must be specified by ...
-
Manufactured by LJM Lind Jensens Maskinfabrikbased in DENMARK
DPAE S100 is also available in 3x230V on request. DPAE S100 is a small pump and is very suitable for liquid manure and for installations in reception pits and small mixer ...
-
Manufactured by EURO-P Kleindienst GmbHbased in GERMANY
ER3-type centrifugal slurry / manure pump with air-cooled electric motor for stationary use as a chopper pump with mixing facility in pits and other storages.The pump is equipped with a three-way valve to switch between the two possible operations of pumping or mixing. The agitation nozzle is pivotable 270° horizontally and vertically by 60°. Using the agitation nozzle it is possible to ...
-
Manufactured by LJM Lind Jensens Maskinfabrikbased in DENMARK
LJM´s pump programme complies to all demands and we have pumps ranging from size 1.5 to 18.5 kW. LJM pumps are used in storage tanks, reception pits, collecting tanks or similar where difficult media have to be ...
-
Manufactured by Maschinenfabrik Meyer-Lohne GmbHbased in GERMANY
They serve as high-performance supply vehicles from the liquid manure- / fermenting substrate stock to the edge of the field. The high percussive force with favourable operating costs contributes substantially to the fast, clean and environment-conscious transport of liquid manure / fermenting ...
-
Manufactured by Cadman Power Equipment Ltd.based in CANADA
The BackPac umbilical system is a highly efficient way to spay manure, with maximum efficiency and minimal soil compression spreading to be done with quickly, and precisely using tanks or with a drag hose ...
-
Manufactured by Koçaksan Cattle Animal Equipmentbased in TURKEY
Koçaksan fertilizer pump have been designed to pump the manure. It’s hard for producers to pumping the manure. This fertilizer pump system is prefered specailly above gathering pool to getting easy to pump manure with least power and labour force. Fertilizer pump can be designed according to pool depth. It can be setup the in the pool wall ...
-
Manufactured by Patz Corporationbased in USA
Consistently transfers slurry manure long distances – up to 600 ft (183 m)!. Energy efficient – hydraulically or mechanically driven. Manure handling with in-the-barn comfort. Long-lasting, proprietary, oxygen- and ozone-resisting seals (Tundra™ Pro Pump only). Works in conjunction with scrapers, gutter cleaners, skid steers, and shuttle box systems. Up to 180 GPM pumping ...
-
Manufactured by DM Machinerybased in CANADA
Here is the new DM manure pump, the most efficient on the market. Reduce your mixing time with less horsepower with the new 2 mixing screw (patented). The pump is designed to run with a tractor from 130hp to 300hp, try it and you will see, you'll impress everyone who will see you work. A two and four wheel model exist, the latter used as a wall-walker in lagoons up to 16ft. deep. Available from ...
-
Manufactured by Slurryquipbased in UNITED KINGDOM
Slurryquip have developed a unique remote control system enabling pump and compressor to be operated from the field, providing the operator with a much more controlled ...
-
Manufactured by Holaras | Hoopman Machines B.V.based in NETHERLANDS
The -holaras- manure mixers, Gigant, Super Gigant and Mammoet allow you to pump liquid manure without problem and spread it on the land in a well-mixed condition. A special mixing cylinder is used for highly effective intake of the manure. Only -holaras- mixers come with the unique patented, yaw-resistant 'mud bearings', which give -holaras- mixers an extra long life. Field and IMAG tests ...
-
Manufactured by JH Agro A/Sbased in DENMARK
In the JHacidificationNH4 + plant liquid manure is mixed with sulfuric acid to adjust the pH value from about 7 to 5-6. When the pH value of the manure is lowered ammonia is converted to ammonium. Ammonium does not evaporate, and therefore harmful ammonia volatilization is reduced – by up to 71 ...
-
Manufactured by EURO-P Kleindienst GmbHbased in GERMANY
ER2-type centrifugal slurry / manure pump to be powered with PTO-shaft fpr stationary use as a chopper mixing pump in pits an other storages (use only PTO shafts with a shear pin as safety mechanism). The gearbox is designed for an input speed of 540 rpm. The pump is equipped with a special valve plate to switch between the two possible operations of pumping or mixing. The agitation nozzle is ...
-
Manufactured by Nuhn Industries Ltd.based in CANADA
Fiberglass is lighter than steel and just as strong when engineered correctly! On average, the weight savings from a fiberglass tank to steel can be the equivalent to 1000 gallons!. Fiberglass is constructed from resin, hardener and glass fibers; therefore it won’t rust out! Manure is very corrosive and fiberglass is even tough enough to last forever with liquid fertilizer!. Nuhn Industries ...
-
Manufactured by Nuhn Industries Ltd.based in CANADA
The Nuhn Triple Port Pump is an animal of a pump! I've been pumping manure since 1996, and over that time I've operated many other makes of pumps. Nuhn pumps are hands down way better than the competitor. Their pumps are more reliable, have better performance and are user friendly. With the triple port outlet, it uses 100 hp less than a competitor pump to pump twice as ...
-
Manufactured by Teamcobased in CANADA
The teamco pre-pits pump is entirely made of stainless steel, including the ball bearings. It is designed for hog manure and other low-fibre liquids. Its shredding 6 inche impeller is complemented with a 2 inches pivoting stirring nozzle. The pumping operation is done though a 4 inch pipe. Greasing points are located near the electric motor to ease ...
-
Manufactured by Direct Biologicals, Incbased in USA
Pit Digester is a mixture of living microbes that liquefy solid manure in hog confinement units. It is a consortium of heterotrophic bacteria and fungi that liquefy organic matter and help plants absorb nitrogen and phosphorus. Pit Digester contains organisms that function over a wide range of anaerobic and aerobic conditions. The result of the bacterial and fungal fermentation is reduced solids, ...
-
Manufactured by Euromacchine Srlbased in ITALY
Cornell high operating pressure pumps are specifically designed for coarse abrasive slurry applications such as sand, gravel and manure. Cornell manure pumps are iron and ductile iron construction with hard face mechanical seals for extended seal life. Optional materials are available for abrasive ...
-
Manufactured by Nuhn Industries Ltd.based in CANADA
Conventional centrifugal pumps only have one discharge on the housing. That means that for every rotation of the fan, the pump is wasting power by trapping manure and not allowing it to easily get out of the housing. By adding multiple outlets, the manure is able to get out of the housing faster, resulting in pumping greater volumes with less ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you