Milk Cooling Downloads

The MP Powertank milk cooling tank series is the leading solution for milk cooling in medium and large livestock and dairy units. They are horizontal type stainless steel tanks with access manholes and automated systems for washing and disinfection after every emptying. MP Powertank tanks are available in 16 capacities, round type from 1,000lt to 14,000lt and elliptical from 10,000 to 20,000lt. ...

Jul. 14, 2017

By Milkplan SA

The MP CoolMilk Transfer refrigerated transportation tank is a smart solution for milk transportation and cooling for a reliable and effective operation everywhere. Made of a double wall thermal insulation with high density polyurethane foam and a full-flow heat exchanger at the lower part to support the direct expansion function, MP CoolMilk Transfer minimizes energy loss while ensuring direct ...

Jul. 14, 2017

By Milkplan SA

The mission of the Αpollo I Milk Pump  (0.75 Hp) is to send milk in an environment of atmospheric pressure (milk cooling tank) and this is achieved in collaboration with the level control system . Once the milk reaches a certain level in the milk receiver, milk pump is activated. The milk pump is always installed below the Milk receiver. The 0.75 hp Milk pump is shelf cleaning type ...

Apr. 10, 2017

By Agromasters

The mission of the Αpollo II Milk Pump (1 Hp)  is to send milk in an environment of atmospheric pressure (milk cooling tank) and this is achieved in collaboration with the level control system . Once the milk reaches a certain level in the milk receiver, milk pump is activated. The milk pump is always installed below the Milk receiver. The  1 hp Milk pump is shelf cleaning ...

Apr. 10, 2017

By Agromasters

Direct expansion closed milk cooler. Capacity: 900 to 30,000 litres. Performance: 2, 4 and 6 milkings. Manufactured in AISI 304 stainless steel and compliant with the most stringent food-processing requirements. Automatic wash in both clockwise and anticlockwise direction. High-performance injected polyurethane foam insulation providing outstanding isothermal properties. Laser-welded evaporator ...

Oct. 1, 2016

By Serap Group

Direct expansion vertical milk cooler. Capacity: 10,000 to 40,000 litres. Performance: 4, and 6 milkings. Inner tank: manufactured in AISI 304 stainless steel and compliant with the most stringent food-processing requirements. Lacquered aluminium panel exterior. Automatic wash in both clockwise and anticlockwise direction. Compliant with standards ISO 5708 and EN 13732. Compliant with European CE ...

Oct. 1, 2016

By Serap Group

A Mueller Plate Cooler reduces the in-tank cooling load and the energy required resulting in significant savings on the overall milk cooling process. By installing a correctly sized Mueller plate cooler, you can save up to 60% of your refrigeration energy costs. All Mueller plate coolers offer a large heat transfer surface area for efficient and gentle milk handling ...

Sep. 29, 2016

By Mueller

Available 2.000 liters milk cooling capacity. With two evaporators for maximum cooling efficiency and reliability. Inner and outer tanks are made of durable AISI 304 Stainless Steel. The lid is easy to open and has a filling hole of Ø 200 mm with inlet cover. Reliable operation, even in high ambient temperatures. Suitable for 2 and 4 milkings. Simple operation and manual tank ...

Sep. 29, 2016

By Paul Mueller Company

Available from 500 to 1500 litres milk cooling capacity. Inner and outer tanks are made of durable AISI 304. The lid is easy to open and has a filling hole of Ø 200 mm with inlet cover. Simple operation, even in high ambient temperatures. Quick installation cooling tank with built-on condensing unit. Suitable for 2 and 4 milkings. Manual tank ...

Sep. 29, 2016

By Paul Mueller Company

A pipe cooler cools the milk before it reaches the milk cooling tank. The heat of the milk is being removed due to cold water flowing in opposite direction of the warm milk. By pre-cooling the milk, the bacteriological level is being stabilized immediately. In addition, you can save on costs, because there is up to 50% less energy consumption. Water that has been approved as drinking water for ...

Sep. 29, 2016

By Paul Mueller Company

Reliable, affordable and versatile analytical tool for detecting extraneous water in milk at any point throughout the dairy supply chain.  Easy to use, accurate, cost-effective and analysis of milk, in compliance with internationally reviewed and recommended methods (AOAC, IDF 108:2002 & ISO 5764:2009) for payment purposes.  Robust electronics, featuring a streamlined calibration ...

Sep. 20, 2016

By Page & Pedersen International, Ltd.

The Anhydro flash cooler is a standardized system designed for quick cooling and slight water evaporation. The most common use is for the production of sweetened condensed milk (SCM) with fresh milk and recombined sweetened condensed milk. The system is delivered from SPX as a finished unit, pre-wired and tested resulting in minimal installation time. The plant is delivered with an automation ...

Aug. 10, 2016

By Anhydro, an SPX Brand

The Mueller P tank is a complete milk cooling tank including standard features such as high quality, perfect finishing, excellent cooling properties and low running costs. The 100% stainless steel cleaning pump and control box have been mounted to the front of the bulk milk cooling tank. The Mueller P tank comes in a capacity of 1,300 to 25,000 ...

Jan. 28, 2016

By Paul Mueller Company

In addition to the current range of Mueller milk cooling tanks, we also offer an extensive range of high quality, vertical milk silo’s. These tanks are specifically designed to provide large capacity milk cooling and storage where space is at a premium. Unlike other milk silo’s in the market, the Mueller silo tank incorporates its patented Temp-Plate evaporators (cooling plates) which ...

Jan. 28, 2016

By Paul Mueller Company

Adding a Mueller Fre-Heater to your milk cooling system can drastically reduce your costs of heating water. Whether your dairy farm operation is large or small, you need plenty of hot water for equipment cleanup, cow prepping, and feeding calves. What better way is there to meet your everyday needs than free hot water? The Mueller Fre-Heater recovers wasted heat from your milk cooler’s ...

Jan. 28, 2016

By Paul Mueller Company

Milk Collection Centers: Complete concept for single or multi tank raw milk cooling and storage. Emerging dairy countries are in the process of stimulating local raw milk production activities. Mueller is part of this process by setting up milk collection points where raw milk is collected, cooled and stored. this strongly improves the milk quality and helps securing the farmer’s income. ...

Jan. 28, 2016

By Paul Mueller Company

The Mueller O tank combines a fast cooling process with low energy use. This is achieved by its oval shape, allowing the efficient cooling of the milk. A large evaporation surface and perfect insulation result in low power consumption. The Mueller O tank offers a great ease of operation. The 100% stainless steel cleaning pump and control box have been mounted to the front of the bulk milk cooling ...

Jan. 28, 2016

By Paul Mueller Company

Horizontal tank with laser welded efficient evaporator. Constructed of stainless steel 18/10 — AISI 304. Chassis with solid leg construction and adjustable feet (standard 2 % slope). Flat manhole and swivelling cover with rubber seal detachable air vent. 2 milk inlet openings, 80 mm (1 in the manhole cover, 1 at the back). REM/DX 2100 and smaller: Tank outlet 50 mm, self washing outlet with ...

Jul. 6, 2015

By Fullwood Ltd

Vertical tank with laser welded efficient evaporator on the bottom and side of the tank.  Withthe pre-cooling of the milk with tubular or plate cooler it enters the tank around 20 °C. Constructed of stainless steel 18/10 — AISI 304. >Sandwich panel construction with PL) insulation gives an extreme rigid construction. Space between floor and tank bottom is insulated, the heat ...

Jul. 6, 2015

By Fullwood Ltd

Horizontal tank with laser welded efficient evaporator. Constructed of stainless steel 18/10-AISI 304. Chassis with solid leg construction and adjustable feet (standard 2 % slope) >Flat manhole and swivelling cover with rubber seal detachable air vent. 2 milk inlet openings, 80 mm (1 in the manhole cover, 1 at the back). Tank outlet 0 80 mm, self washing outlet with butterfly valve 0 65 or 80 ...

Jul. 6, 2015

By Fullwood Ltd