Only show results available in Virginia? Ok

Milking Parlors equipment for Livestock

  • Traffic Management System

    Rimas has developed an efficient solar panel traffic management system. Solar laminates that are ready for lamination, are automaticaly positioned, aligned and grouped in front of the laminator. In case of multiple laminators, the in feed traffic of solar laminates is steered towards laminators based on availability. At the out feed side, the ...

    By RIMAS bv based in Beringe, NETHERLANDS. from Machinery - Lamination Product line

  • Feed Milling

    Crowley Engineering is Ireland's leading supplier of Feed Milling Equipment. From complete Feed Mills to upgrading or extending of existing plants. Crowley Engineering can provide a full service from design right through to installation and commissioning. Our range of equipment includes:Conveyors and elevators, raw material and bulk out storage ...

    By Crowley Engineering based in Cork, IRELAND.

  • Trailed Parlours

    Our trailed parlours are self contained milking parlours that can be easily towed to location and set up to run within minutes.

    By Greenoak North America Inc. based in Kitchener, ONTARIO (CANADA).

  • Feed Loading Systems for Battery Cages

    FALCON chain transport systems, thanks to its flexibility, can carry out very tortuous vertical and horizontal circuits,  difficult to achieve with traditional screw conveyors. You can get a system with a maximum capacity of 12 tons / hour, with a very low power, ranging from 1.5 to 4 HP per circuit. Con lo stesso trasportatore, si possono ...

    By Falcon Srl based in Brivio (LC), ITALY. from Poultry - Layers Product line

  • NuPulse FulFlo - Model 12000NP - Standard Claw

    Same features as the Original NuPulse Claw, but with an elongated bowl and larger milk inlets for faster milking, also comes in a parallel parlor design, also has a shut-off option available.

    By E-Zee NuPulse - E-Zee Milking Equipment, LLC based in McFarland, WISCONSIN (USA). from Claws Product line

  • Agro-Breeze - Model 53 - Panel Fan

    Standard 1 HP, single or three phase U.S. motor. 6 blades – quiet, smooth operation. Belt can be changed without removing fan blades. Equipped with automatic belt tensioners. Bess Labs Certified - Meets energy rebate requirements!

    By Agromatic Inc based in Fond du Lac, WISCONSIN (USA). from Barn and Parlor Equipment- Ventilation & Curtains Product line

  • Mechanic Crowd Gate

    Backin gate made of galvanized steel sections. The gate liftable by hydraulic cylinders, is made with galvanized steel frame and is equipped with a closing barrier. The feed is ensured by a gear motor with pinion which engages on a roller chain stretched between the two ends of the waiting room, it is supported by the guides in U-shaped steel, ...

    By TDM- Nutriservice s.r.l. based in San Paolo BS, ITALY. from Cows- Crowd Gate Product line

  • PANORAMA EFFECT - Side by Side Type Milking Parlour

    Cows take their places in the milking parlour, standing at the angle of 90 degrees to the milking channel. The ultimate goal of this solution is to ensure high performance owing to quick process of cow positioning for milking and high capacity of the system. Grouping of cows in the herd as per similar milking times is a key element in the ...

    By Serwis-Centrum Ltd based in Bydgoszcz, POLAND. from Milking Parlours Product line

  • Paula - Automatic Feeding System

    The Urban CalfMom enables the fully automatic feeding of your calves. This not only saves you much work and time, but you also benefit from many additional advantages of this extremely well thought-out feeding machine. The Urban CalfMom is equipped for all tasks: It will alternatively feed calf milk replacer or up to 100% whole milk while ...

    By Urban GmbH & Co.KG based in Wüsting, GERMANY. from CalfMom Product line

  • Herringbone - Milking Parlour

    The agromasters herringbone milking parlor combines advanced milking technology, but always with the lowest required investment. The milker sees clearly the 4 teats of the cow due to herringbone indexing of the animals. The ergonomic working position for the operator – ensures a comfortable milking job.

    By Agromasters based in Thessaloniki, GREECE. from Milking Parlours - Milking Parlours for Cows Product line

  • Milking Parlours

    Excellent, well regulated milking equipment is very important to achieve high quality milk and good udder health. Therefore Van der Ploeg International developed its own milking parlours named: DUTCHLAC, delivered in 3 variants:

    By Van der Ploeg International BV based in Leeuwarden, NETHERLANDS. from Dairy Farms Product line

  • Eco-Stall Milking Parlor

    When larger parlor manufacturers said there was no demand for swing arm systems, Fisher & Thompson decided to design and engineer their own. The ECO-Stall milking parlor is ideal for dairies with 50-250 cows. ECO-Stall follows a parallel stall set up in which one set of milker units are used on one side of the parlor and then swing over on an arm ...

    By Fisher & Thompson Inc based in Leola, PENNSYLVANIA (USA).

  • FARMTEC - Parallel Parlors

    Parallel parlors provide milkers easy access to the udder between the cow’s back legs.

    By FARMTEC a.s. based in Jistebnice, CZECH REPUBLIC. from Parlours and Milking - Milking Parlors Product line

  • Outside Rotary Milking Parlour

    Herringbone or parallel structure, made of stainless steel or galvanized steel; platform rotation by gearmotors with variable speed .The rotation speed is manually controlled by the operator, to adapt it to the needs of the milking routine.

    By TDM- Nutriservice s.r.l. based in San Paolo BS, ITALY. from Cows- Milking Product line

  • ALBOUY - Model EUROSTALLE - Linear Milking Parlour

    ALBOUY Equipement proposes the EUROSTALLE for fitting out your milking parlour.  Salient features: Time saving. Working comfort, fully automated entry and exit of animals makes the work less tiring. Optimisation of the feed, contention more efficient: milking rate adapted to a single milker.

    By Albouy Equipement based in BARAQUEVILLE, FRANCE.

  • Agromilk - Model dbl. 32 - Herringbone Milking Parlor

    Pneumatic gate control. Optional rapid exit. Industrial vacuum pump with frequency regulator. Stainless steel milking claw. Electropulsators. Automatic milk pumps. Digital CIP washing controller. Automatic take-off machine with rope or optional arm. Optional rubber mat floor. Optional computerized management system with automatic identification

    By Agromilk Ltd. based in Székesfehérvár, HUNGARY. from Milking Equipment- Milking Parlor Product line

  • Gomma - Rubber Mats

    AGRICOW internally manufactures Stall Mats and Dairy Flooring thanks to a big investment in machinery, moulds, and specialized software that puts us among the leading manufacturers of supplier of market stalls all over the world. Thanks to an updated Injection Moulder Machine duly built,  Agricow is able to ...

    By Agricow srl based in Carpenedolo (BS), ITALY. from Other Products Product line

  • Fullwood - Model Index 90 - Parallel Milking Parlours

    A parallel rapid exit parlour designed for high throughputs. A parallel rapid exit parlour designed for high throughputs. The unit provides individual indexing of the cows ensuring optimum udder presentation. Gravity controlled indexing gates hold the animals in position whilst being milked then lift up and out of the way to allow them to exit. ...

    By Fullwood Ltd based in Ellesmere, UNITED KINGDOM. from Fullwood Conventional Milking Parlours Product line

  • Fullwood - Model HB50i - Herringbone Milking Parlours

    Fullwood HB50i Swing-over, high level herringbone parlour. A parlour which will last generations. Minimal disruption to herd due to quick installation. Cost effective parlour with minimum maintenance. Cow and operator comfort and fast cluster attachment due to ideal cow position. Height adjustable to operator (on installation). Reduced milk lift ...

    By Fullwood Ltd based in Ellesmere, UNITED KINGDOM. from Fullwood Conventional Milking Parlours Product line

  • Premier - Model 35 Head - Corral System

    Designed to handle approximately 35 head, this corral features a 180 degree Premier Open Sweep with a 32’ straight working alley that leads to a Model S04 Squeeze Chute. This system is constructed from our number one selling cattle panel, the Premier Panel. The CS-1 features a single holding pen that feeds into the sweep. The working alley ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you