Agricultural Industry Equipment In Serbia
-
PremiumManufactured by Delta-T Devices Ltd.based in UNITED KINGDOM
Stomatal aperture is the dominant factor in the diffusion conductance of leaf surfaces, which controls both the water loss from plant leaves and the uptake of CO2 for photosynthesis. Measurements of diffusion conductance are therefore important indicators of plant water status and provide a valuable insight into plant growth and plant adaptation to environmental ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Eijkelkamp Smart AGR Stackable manure - Air suspension, for truck with trailer with fixed body or suitable for container transport, complete set consisting of the Smart AGR basic, including app and service subscription, car holder, car charger 12/24 V, case, Smart AGR unit cabin, Smart AGR sensor, Smart AGR unit trailer and Smart AGR sensor (exclusive installation costs). ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The standard tensiometer consists of a clear transparent plastic tube with a ceramic cup at the bottom end and a manometer at the top. The standard tensiometer is delivered in various lengths allowing the execution of simultaneous measurements at various depths in the root zone. For pre-drilling special auger sets can be ...
-
PremiumManufactured by Delta-T Devices Ltd.based in UNITED KINGDOM
- lower cost research-grade multi-parameter sensor - Measures moisture, temperature and EC - Digital SDI-12 for easy system integration - Rugged and low power - Accurate monitoring of soil conditions - Detachable and extendable cable system - 5 year warranty - The new digital multi-parameter WET150 soil sensor represents the culmination of forty years research and development at Delta-T Devices. ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
With the Rhizon soil moisture sampler we supply a range of miniature soil moisture samplers. The Rhizon samplers are used for repeated and reliable sampling of all dissolved components in the soil solution. The porous plastic material (PES) wets spontaneously and has standard 0.15 micron pores. The samplers are supplied with coextruded tubing (PE inside / PVC outside) 1 mm internal diameter, luer ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Also included in our product range is the WET sensor, to measure pore water conductivity and temperature in the top layer of a soil. The measurement values are shown on the display of the hand held meter and can be stored in the memory (including time and sensor location). These data can be read on a ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Coupling, male part, for hand- operated manure sampler, Ø 6" with square flange, exclusive packing and fastening ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Tensiometer set. Complete standard set for multiple measurements to a depth of 90 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Automatic, fraud-proof sampling chamber for liquid ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Soil water sampler with porous plastic cup. Complete standard set with 3 samplers with Ø 20 mm (length 30, 60 and 90 cm), 3 sample bottles with stoppers, hand vacuum pump and insertion auger ...
-
PremiumManufactured by Delta-T Devices Ltd.based in UNITED KINGDOM
The new digital multi-parameter WET150 soil sensor represents the culmination of forty years research and development at Delta-T Devices. Through a number of key design innovations it delivers research-grade accuracy and build quality at a price point not previously thought possible. It is the ideal sensor for research of soil conditions – and for integration into SDI-12 environmental and ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Coupling, female part, for hand-operated manure sampler, Ø 6" with square flange, exclusive packing and fastening ...
-
Manufactured by Cenzone Tech-Europe , ltd.based in USA
An aquatic probiotic blend for water treatment of shrimp and fish ...
-
Manufactured by FPM Agromehanika DOObased in SERBIA
FERTI fertiliser spreaders fall in the category of mounted spreaders and are designed for distribution of dry granular, powdery and crystalline fertilizers, and lime. A spreading disc equipped with six spreading vanes ensures even distribution of inorganic fertilisers, while double regulation controls the desired application rate and allows right or left side dispersal only, or full-width ...
-
Manufactured by FPM Agromehanika DOObased in SERBIA
Mulchers for farming are a type of agricultural mulchers and are primarily designed for shredding of plant residue upon harvesting of field crops such as: maize, sunflowers, straw, sugar beet, rapeseed, rice, etc. Beside their basic purpose, mulchers can also be used for shredding of crop residue, for maintenance of all other agricultural, public, neglected or uncultivated areas. Due to ...
-
Manufactured by Krušik-plastika ad Osecinabased in SERBIA
Tubs are made of high density polyethylene and polypropylene. They consist of a flat bottom, and cylindrical wrapper. the conical cover is produced for the tubs so that prevents the entry of atmospheric precipitation and dust into the tubs. It is also produced floating cover for sauerkraut. Tubs are produced in standard black color, all though it is possible to produce them in other colors by the ...
-
Manufactured by Plastic Pugliabased in ITALY
Used in: Gardening ― Greenhouse ― Open Field ― Tree crops ― Water ...
-
Manufactured by Plastic Pugliabased in ITALY
Used in: Gardening ― Greenhouse ― Open Field ― Tree crops ― Water ...
-
Manufactured by Agrikolbased in SERBIA
The construction process for glasshouses requires few operations, such as: marking, cutting, installing, repairing and maintaining of steel constructions. It is a precise process from its begining. Precise calculations, construction drawings, marking, preparation, cutting of materials, and asembling of elements. Elements and sets of steel constructions are connected by screws and nuts, rarely by ...
-
Manufactured by Plastic Pugliabased in ITALY
The ecological polypropylene seed tray is an innovative product introduced on the international market by Plastic-Puglia over the last few years. The seed tray, consisting of 228 alveolus, is made of rigid, thermoformed plastic and is designed for both horticultural and flower nursery use. The product is suitable for manual or mechanized production processes. It is resistant to shocks and heat, ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you