Weldy Livestock Equipment
-
Manufactured by Weldy Enterprisesbased in USA
Features a deep side and rounded bottom to give large capacity. A 2″ turned in top edge gives extra strength and helps prevent feed waste. A heavy center brace ties the feeder together and full depth steel end add to the feeder’s life and ...
-
Manufactured by Weldy Enterprisesbased in USA
6-Sided Feeder. Designed for calves. 12 slanted bars. Steel ...
-
Manufactured by Weldy Enterprisesbased in USA
Feeds silage, grain or hay. Two inch turned in ledge on bunk helps eliminate waste. Tube around top is 2″ x 2″ square and adds strength to the feeder. Telescoping tongue is standard. Trough height is 28″. Custom sizes & Designs ...
-
Manufactured by Weldy Enterprisesbased in USA
The double bunk feeder has a deep side and rounded bottom. This provides large capacity for grain or silage. A 2″ turned in and under top edge adds strength and helps prevent feed waste. The rugged steel hay saver rack accommodates square as well as large round bales. Hay that is pulled from rack and not eaten falls into the bunk and is saved, not lost on the ground. The heavy 2×2 ...
-
Manufactured by Weldy Enterprisesbased in USA
Fence line bunks form a division between the feed lot and feeding area. This allows feed to be placed in the bunk without entering the lot or dumping it over a fence. The bunk side toward the cattle is closed preventing a buildup under feed bunk. Cattle restraining bars are welded to the bunk on the cattle side forming a fence. This prevents cattle from stepping or falling into bunk in addition ...
-
Manufactured by Weldy Enterprisesbased in USA
This feeder wagon, a full seven feet wide, is 100% steel constructed with 6,000-pound spindles. The tricycle front end (for easy towing) turns sharper than 90°, and an extended tongue assures easy hitchup. This double bar wagon with an exterior frame is available in eight lengths ranging from 12 to 40 feet – one for every ...
-
Manufactured by Weldy Enterprisesbased in USA
Designed to feed silage, green chop, large round or square bales The 3/4' exterior plywood is 4ft. high and is easy to remove for feeding large round bales. The 'V' in center promotes feed-down within the reach of the animals. Equipped with a telescoping tongue and 11 L15 8-ply tires and tubes. Trough height is ...
-
Manufactured by Weldy Enterprisesbased in USA
We have been suppling stalls, pens, panels and gates to county and state fairs all around the United States for decades. We supply what you need. The above photograph shows a ten-pen unit, and units are available in different numbers of pens and sizes of pens. A pen series can be placed in an arena and can be part of a partition. Gates swing in and out and lock shut. The patented latch eliminates ...
-
Manufactured by Weldy Enterprisesbased in USA
6-Sided Feeder. Designed for cattle or horses. Feeds hay and grain. Has 12 slanted tubular steel bars with steel floor, skirt, and ...
-
Manufactured by Weldy Enterprisesbased in USA
Seven bars all 1-1/4 inch square tub. Secure panel interlocking usingstandard upper attached pin. Mitered upper corners for added strength and safety. Loop leg on female end. Lengths: 8′ 10′ 12′. Height: 66″ 66″ ...
-
Manufactured by Weldy Enterprisesbased in USA
Designed to carry hogs and other livestock. Also transports many farm or industrial items. A 3-point hitch is built into the frame enabling you to carry 5000 lbs. 3″ square steel tube hitch frame. 1-1/2″ square steel tube basket panels. Floors are 2″ center matched Treated lumber. The back panel swings either way to provide a full opening as a panel gate, or can be removed ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you