Livestock Equipment Near Norway
-
Manufactured by Amandus Kahl GmbH & Co. KGbased in GERMANY
When processing wheat, spelt or other types of grain, various product components are produced, e.g. in a typical flour mill mainly wheat flour, which is used for the production of bakery products. However, bran, i.e. the husk of the wheat grain, which has a higher or lower starch content, is also produced as a ...
-
Manufactured by Syndelbased in USA
Virkon Test Strips are used to measure the concentration of prepared Virkon Aquatic solutions. They can be used to verify the solution strength in foot baths and on surfaces being disinfected. Virkon Aquatic solutions are produced by mixing Virkon Aquatic powder into working solution strengths of 0.5, 1.0 or 2.0% with the 1.0% concentration being used most often. Virkon Aquatic solutions will ...
-
Manufactured by Amandus Kahl GmbH & Co. KGbased in GERMANY
With our extruder OEE 25 NG (New Generation) we provide the extruder market with fresh impetus. The highest level of engineering and professional further development of our existing extruder make operation even easier than ...
-
Manufactured by Amandus Kahl GmbH & Co. KGbased in GERMANY
With our horizontal and fast-rotating agitator-blade mixers, mealy, granular, fibrous and/or flaky carrier substances can be mixed with liquids. Our continuous mixer allows simultaneous addition of several bulk product flows, liquids and steam. Using the whirling principle, you can produce a lump-free mixture. The throughput time and the type of whirl formation can be influenced by adjusting the ...
-
Manufactured by Reikälevy Oybased in FINLAND
A tank of 4500 liters, a secondary clean water tank of 650 liters, a boom length of 15 to 28 m wide. It has been designed in 2015-2016, in Reikälevy factory. The focus has been to propose a new SAMI Sprayer for Finland and Europe, equipped with the last technologies, allying quality, reliability and best production ...
-
Manufactured by Amandus Kahl GmbH & Co. KGbased in GERMANY
From weighing to proportioning, mixing, conditioning, expanding and extruding - AMANDUS KAHL not only supplies you with all the machines for an industrial compound feed plant, but also takes over the planning, logistics and necessary construction measures for a turnkey ...
-
Manufactured by Amandus Kahl GmbH & Co. KGbased in GERMANY
Increase the quality and/or the energy content of your feed and introduce liquids deep into the pores of shrimp and fish feed, pellets, extrudates, poultry feed and pet ...
-
Manufactured by Amandus Kahl GmbH & Co. KGbased in GERMANY
The extruder is essential for the production of pet food. The KAHL extruder OEE 25 NG produces different types of pet food of the highest quality. Our plants for the production of pet food consist of a wide range of machines, all designed and produced by KAHL. We not only provide the conditioning of the product to be extruded, but also supply the appropriate machines for subsequent drying, ...
-
Manufactured by Runi A/Sbased in DENMARK
Separation and Compaction of Dairy Products: Dairies need to destroy the returned goods such as yogurt and other dairy products with expired date and faulty manufacture. RUNI screw compactor handles both emptying, compacting and destruction, in one process, continuously, and both handling and storage at the manufacturer is hereby saved. It increases the certainty of destruction and saves ...
-
Manufactured by Syndelbased in USA
Virkon Aquatic is a concentrated powder that when mixed with water, forms a powerful cleaning and disinfecting solution with proven efficacy against fish viruses including ISA, IPN, Rhabdovirus (IHN, VHS, SVC) bacteria, fungi, and molds. Virkon Aquatic is approved for the disinfection of environmental surfaces associated with aquaculture including vehicles, nets, boots, waders, dive suits, ...
-
Manufactured by Syndelbased in USA
Syncaine (MS-222, TMS, tricaine methanesulfonate) is an FDA approved (ANADA 200-226) fish anesthetic used for the temporary immobilization of fish, amphibians, and other aquatic cold-blooded ...
-
Manufactured by Syndelbased in USA
PARASITE-S is an approved parasiticide for the control of external Protozoa and Monogenetic Trematodes on all fin fish. It is also approved as a fungicide for fin fish eggs. See the 'Directions for use' above for approvals and directions for use. To use PARASITE-S to treat additional diseases or species not covered on the current label, a licensed veterinarian may be able to prescribe the legal ...
-
Manufactured by Syndelbased in USA
Aquacalm is the trade name for the fish anesthetic/sedative Metomidate hydrochloride. Currently unavailable. Find Syncaine as possible alternative. ...
-
Manufactured by FAIVRE Etsbased in FRANCE
Fish elevators are very frequently used in continental fish farms, especially in trouts farming and used to feed an automatic fish grader. Versatile and robust, this elevator is also used in tilapias, sea breams, sea bass farmings ... Made with quality ...
-
Manufactured by Saga Roboticsbased in NORWAY
Thorvald is an autonomous modular robot that can be configured for most agricultural environments. It can operate in open fields, tunnels, orchards and greenhouses and perform tasks such as light treatment for disease management, picking fruits and vegetables, phenotyping, in-field transportation, cutting grass for forage production, spraying and data collection/crop prediction. Thorvald ...
-
Manufactured by Syndelbased in USA
HALAMID AQUA is the brand name of the FDA approved Chloramine-T treatment product for use in Aquaculture. HALAMID AQUA is available in 5 kg pails and 25 kg drums. SYNDEL is proud to be the exclusive distributor in the United States for HALAMID AQUA, which is currently available in 25 kg ...
-
Manufactured by Amandus Kahl GmbH & Co. KGbased in GERMANY
The use of our extruder OEE 25 NG for the production of fish and shrimp feed not only facilitates precise shaping and setting of the extrudate density, but also enables die changes within 10 minutes. Our KAHL fish feed plants are equipped with the latest process technology, the core of which is the extrusion system with the extruder OEE 25 NG and the process control system ...
-
Manufactured by Amandus Kahl GmbH & Co. KGbased in GERMANY
Our crushing roller mill is used for crushing natural food and feed mixtures. The two counter-rotating rollers crush the respective product so that small particles are produced with low fines ...
-
Manufactured by Amandus Kahl GmbH & Co. KGbased in GERMANY
The high-speed mixer excels by very short batch processing times (complete mixing within 20 - 90 seconds). Its design ensures easy cleaning of the mixer, complete product discharge, and perfect ...
-
Manufactured by SERRA Maschinenbau GmbHbased in GERMANY
Increase your output with the CS 600! High resaw performance with state of the art circular saw technology! This innovative design consists of two 15 mm thick, laser-cut and machined steel side members between which the entire machine is assembled. The chain and V-belt drives are mounted externally. The speed of the two separately driven feed units with profiled feed rollers is adjustable via a ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you