Model 3002 and 3004 - Scrapers

0

Rowse Scrapers are durably built, with all welded construction, to last for years of heavy-duty, low-maintenance use. Their versatility allows you to move dirt, level land, dig holes, clear areas and drain or fill low spots. The complete operation is controlled by one single-spool, double-acting hydraulic control valve.

The Rowse 300 Model Hydraulic Scraper is designed for loading with smaller horsepower tractors but “built tough” for use with larger tractors, too. The Scraper’s 8ft. wide cutting edge is wider than its wheels; and, when teamed with a single rear wheeled tractor, lets you cut or fill close to exisitng structures or fences. The main hinge pivots are 2¼” cold rolled shafts with bronze bushings. Two double-acting hydraulic cylinders with 1½” chrome shafts position the scraper for loading, carrying and dumping. The 300 Model is available with two front wheels and other options.

The Rowse 500 Model and theRowse 700 Model Scrapers are designed for use with two or four-wheel drive tractors. Both have a gooseneck hitch to allow 90° turns for easy maneuverability around obstacles.

Rowse Scrapers feature heavy-duty frames of rectangular steel tubing for strength and stability.

The main hinge pivots are 2¼” cold rolled shafts with bronze bushings. Two double acting hydraulic cylinders, with chrome shafts (2″ Model 500, 2″ Model 700), position the scraper bucket. A depth gauge is standard on the 500 Model and the700 Models.

Rowse Scrapers feature heavy-duty frames of rectangular steel tubing for strength and stability. A 3-piece frost blade attaches to a double reinforced bucket edge for maximum strength. The 8ft. cutting blades are removable, reversible, roadgrader-type steel. With fingertip operation from your tractor seat, the precise hydraulic control gives you an adjustable load or spread depth from 2″ to 13″.

The 500 Model, 700 Model, XL500, and theXL700 Scrapers are protected by a shear pin in the tongue should an immovable object be struck. All Rowse Scrapers are equipped with transport bolts for safe transporting behind a pickup at highway speeds.

  • Capacity, heaped  3 cubic yards (approx.)
  • Width of cut  95¾”
  • Overall Width  111″
  • Box Width, front to rear gate  43″
  • HP Requirements  50 and up
  • Weight  Approx. 2000 lbs.
  • Hydraulic Requirements  One double-acting control valve
  • Blade  Removable, high carbon steel
  • (3-piece high carbon steel frost blade)
  • Tires  95L x 15, 6-ply included with Scraper

Customer reviews

No reviews were found for Model 3002 and 3004 - Scrapers. Be the first to review!