Model 888 - Cultivator/Lister Precision Cultivation and Bedding

From

0

Precision bedder. Herbicide-Resistant Weed killing cultivator. One Machine. Bigham Brothers introduces our Model 888 Culti-Lister. Get precision cultivation at high speeds. Configure this flexible tail gang with a variety of tools for early- through late- season cultivation, or with bedding tools for precision seed bed preparation.

Get precision cultivation at high speeds.

Configure this flexible cultivator with a variety of tools for early- through late-season cultivation. Exchange cultivation tools for a rear buster and you have an instant 888 Culti-Lister.

Our new Quick Adjust tooling receiver lets you set barring-off disks with a simple pin setup. No wrenches or measuring tape needed!

Model 888 Features

  • Parallel linkage incorporates polymer bushings that never need greasing.
  • Height adjustable front tooling.
  • Selection of rear shanks and tooling.
  • Exclusive curved shank with No-Twist™ foot piece. Holds our Bigham 348 HiWing™ Buster firmly in place for straight, true rows, and allows pin-point adjustment of cultivator sweep.
  • Available spring-loaded chisel clamp assembly with adjustable tensions of 500, 800, and 1200 pounds point pressure.
  • Front slot for cross tube to accommodate additional tools.
  • Rugged gang construction features reinforced connection points for long life.

Parallel Linkage

  • 1” Diameter Pivot Bolts, not 5/8 or 3/4”
  • Polymer wear bushings keep the linkage assembly tight and do not require grease.
  • U-Bolt mounted clamps give more vertical travel.
  • Wrap-around clamp keeps gang straight and prevents “walking” in side-draft
  • conditions, and moves the gang forward, making the unit easier to lift.

Tooling Bar

  • Standard cast clamp. Optional 4×4″ tube  w/1×3” shank slot. Attach choice of tooling w/ 4×4” clamps.
  • Optional Quick Adjust tooling receiver for easy pin adjusting in 1/2” increments.

Adjustable Front Coulter

1-1/8” Arbor Bolt

  • Two heavy 208 series sealed ball bearings with triple-lip seals in each coulter hub.
  • Adjust coulter depth with easy adjusting handle.

Depth Control Tire

  • Front 18×8.5×8 8-ply tire provides positive depth control.
  • Four-hole hub equipped w/2 triple-lip sealed ball bearings.

Non-Adjust Front Coulter

  • 1-1/8” Arbor Bolt
  • Two heavy 208 series sealed ball bearings with triple-lip seals in each coulter hub.
  • Available in fixed or swivel.

Gang Operating Features

  • Optimized tool spacing.
  • Maximum trash and soil flow between tillage components is based on many years of field experience.
  • Only one grease zerk per row. Greasing interval is once each operating season.

Barring Off Discs

  • Peel weeds away from young, tender crops or hill dirt into the root base of more mature crops.
  • Compound angle settings allow you to pitch the cutting edge away from the crop to prevent root pruning.

Crop Hoods and Shields

  • Adjustable side-to-side for any row width, front-to-back to match sweep placement, up and down for desired protection.
  • Set fenders to control flow for maximum protection or raise to push soil into the base of the crop.
  • Parallel link collision protection.

Rear Shanks

  • Assortment of rigid and spring-loaded shanks.
  • Adjustable foot piece offers friction trip protection.
  • Mount Sweep for clean-out and cultivating operations or mount Buster for Lister operations.

Rear Bedding Sweep

  • Builds and shapes beds.
  • Adjusts to vary bed height.

Rear Cultivator Sweep

Undercuts weeds and pushes dirt onto base of mature plants.

Irrigation Shovel

Clears furrows for efficient irrigation flow.

Inter-row Ripper Shank

  • Height adjustable 1×3 or 1×4 shank, cut from high-strength material to withstand deep soil penetration. Standard fertilizer tubes for liquid fertilizer application.
  • 1×3 shank scarfed on soil edge and equipped with chromium carbide point.
  • 1×4 shank features cast sharpened chromium carbide shin.

Customer reviews

No reviews were found for Model 888 - Cultivator/Lister Precision Cultivation and Bedding. Be the first to review!