A.A.S. - Model S180 FL - Drip Irrigation Production Line
From Production Lines
Drip irrigation production line for the production of flat dripline in thin, medium and hard wall, with the integration of A.A.S. Turbo or Cyclone PC emitters. Production speed up to 180 meters per minute and up to 600 emitters per minute inserting rate.
Details
The feeder unit consists of a pre-feeder with hopper storage for the emitters, the centrifugal feeder and a conveyor. The capacity of the feeder unit with A.A.S. Turbo flat emitters is up to 1.250 emitters per minute. The inserting unit encompasses a programmable controller which enables inserting of flat emitters at user selected spacing. Inserting unit's recommended operational capacity with Turbo flat emitters is up to 600 emitters per minute.
The drilling unit design along with fast motion robotic algorithms enables industry leading production speeds, combined with minimum vibration and high mechanical strength. Drilling capacity of the unit, with Turbo flat emitters is up to 1.250 holes per minute at a line speed of up to 180 meters per minute.
S180 FL is offered with a dual option for the inserting and drilling system of emitters. The production line may process both Cyclone PC and Turbo flat turbulent emitters. Alternatively, S180 FL can operate with any flat emitter.
The system constantly detects actual position and shape of all water outlet holes in order to ensure a perfectly produced dripline.
- 75/36 single screw extruder
- Manual screen changer
- PE pipe crosshead with single, double or triple layer with striping option
- Vacuum calibration
- 16 meter water cooling module
- Closed loop water circulation system
- Inserting and drilling system
- Caterpillar haul off
- C180 flat dripline coiler
S180 FL Specifications
- Production Speed : Up to 180 m/min
- Inserting Capacity : Up to 600 emitters/min
- Emitter spacing : Minimum 100 mm
- Emitters : A.A.S. Cyclone PC and A.A.S. Turbo Emitters
- Raw material : Polyethylene (PE)
- Output product : Drip irrigation pipe
- Pipe diameter : Minimum of 12 mm and up to 35 mm
- Pipe wall thickness : Minimum of 5 mil and up to 36 mil
Customer reviews
No reviews were found for A.A.S. - Model S180 FL - Drip Irrigation Production Line. Be the first to review!