Advanced - Model SSWRO-0004 - Small Seawater Reverse Osmosis System (SWRO)
From Reverse Osmosis Products - SW - Seawater Desalination - Small Seawater Reverse Osmosis (SWRO)
Specifications: 3 membranes 4x40. 7.5 HP stainless steel RO pump. Weight: 420 lbs. (191kg). Size: 36x19x71 inch. (91x48x180 cm). 3/4” feed connection. 1/2” product connection. 3/4” reject connection.
- More about this product — External link
-
Most popular related searches
Key Features
Standard
- Membrane flux rate below 10 GFD to extend membrane life and minimize fouling.
- Reciprocating pumps with nickel aluminum bronze fluid end; sized at no more than 65% of the maximum rated RPM.
- Suction and discharge pulsation dampeners (non-corrosive) or a non-pulsating type pump (depending on capacity)
- Dual or triplex multi-media filtration sized for manual or automatic backwash of one while continuing system operation
- Cartridge filtration
- Automatic inlet feed valve
- Automatic feed water flush on startup
- Automatic product water flush on shutdown
- Conductivity monitor/controller driven product diverter valve to dump unacceptable water
- Permanently piped membrane cleaning system.
- PLC driven control panel
- Energy recovery system (Turbo or Pressure exchangers) based on customer need
- Passivation treatment of all welded SS316L, Super Duplex S.S. piping
- 15″ HMI for operator interface
- Digital flow meter and pressure transducers
- Nema 4X electrical equipment
- Remote control monitoring
- TEFC electric motors
- Compact footprint
Optional equipment
- Remote control
- UV sterilization
- Chlorination
- Dechlorination
- PH adjust
- MM filters ( sand, antracite, activate carbon )
- Ion exchanger
- Corrosion inhibitor
Customer reviews
No reviews were found for Advanced - Model SSWRO-0004 - Small Seawater Reverse Osmosis System (SWRO). Be the first to review!