Agglomeration with Compactors
From Other
The agglomerator model HV is a compactor for the densification of regrind of low bulk density - e.g. shavings, foam, fibres and film.The agglomerator model HV is a compactor for the densification of regrind of low bulk density - e.g. shavings, foam, fibres and film.
-
Most popular related searches
The agglomerate has a higher bulk density than the...
The agglomerate has a higher bulk density than the source material; it has good flow characteristics and can be extruded or injection-moulded without forced feeding. In mixing silos (e.g. after film washing lines) densified material gives higher amounts of material in a mixing batch, thus producing a more even mixture.
In contrast to standard pot agglomerators or compactors, the agglomerator model HV carries out a continuous process without adding water to the material. The flakes are pre-granulated in a granulator and automatically fed into the agglomerator/compactor via a buffer silo. The agglomerate is reground in a second granulator; an air classifier sorts out dust and fine particles and returns them again into the densification process for further agglomeration.
The agglomerator/compactor itself consists of two discs equipped with kneader rails, one of which has a rotating mounting; a drive performance of between 22 kW and 160 kW (30 hp to 220 hp) at the rotating disc generates the friction needed for the densification process.
Customer reviews
No reviews were found for Agglomeration with Compactors. Be the first to review!