Agricultural Industry Equipment Available In Norway
-
Manufactured by FELLA-Werke GmbH - a brand by AGCO Corporationbased in GERMANY
FELLA has specially developed three very light yet robust hay tedders for alpine terrain. Maximum safety is still ensured even on extreme slopes thanks to the low centre of gravity and the compact transport position. As with all FELLA hay tedders, the forage is picked up by the tines and turned gently without suffering damage. A light, loose and well-mixed layer of forage is created, all of top ...
-
Manufactured by Kerian Machines Inc.based in USA
When designing cucumber and pickle sorting equipment, we recommend a single set of straight rollers combined with turning flaps that will align the cucumbers and pickles with the rollers. This guarantees that they are consistently sorted by diameter. This is shown in the videos here and ...
-
Manufactured by Schwartz Manufacturing Companybased in USA
Perfect-Fit is a patented new approach to in-line milk filtration. The Perfect-Fit System consists of a stainless steel coil, a rubber retainer and a Perfect-Fit filter fitting securely around the coil. The sock and the coil are sized perfectly to make a snug fit, thus eliminating the problem of excess filter media which can lead to voids, breakage and lack of uniform filtration. The long-lasting ...
-
Manufactured by SMS CZ s.r.o.based in CZECH REPUBLIC
The clamp attachment of the working units enables a quick change of their working width according to immediate needs. Also equipping with the de-clodding roller is optional - any other type of roller besides a fan roller can be ...
-
Manufactured by TAD-LENbased in POLAND
Length mm 1370. Width mm 3000. Height mm ...
-
Manufactured by Nobili S.p.A.based in ITALY
With columns made of special extruded steel profile, the tractor mounted fork-lifts ME 20/320 can be fitted to the back of the tractor. The special design and manufacturing of the lifting parts allow to the operator the maximum visibility while working. The steel forks, adjustable in width, as well as the case holder are tip-up. The movements are carried out by bearings and rollers. Lifting ...
-
Manufactured by BOSS Products, a division of The TORO Company.based in USA
The BOSS XT plow's flared blade wings and enhanced curl design throw snow higher and farther than conventional snowplows, while the full moldboard trip design helps prevent plow damage when an obstacles is encountered. The XT is designed to take on winter's worst with a heavy-duty push frame and center section. Available in poly, steel or stainless steel, the BOSS XT is a proven innovation from ...
-
Manufactured by Desarrollo Agrícola y Minero, S.A.based in SPAIN
AfterFruitis a nutritional deficiency corrector for post-harvest application. The micronutrients are formulated with penetrating agents promoting uptake.AfterFruitis recommended to provide the crop with an improved nutritional state during the subsequent sprouting and improve bud ...
-
Manufactured by Poly-Hort B.V.based in NETHERLANDS
This film has high mechanical properties to withstand maximum stress during installation. This film is also available with different Light Transmission, Infra-Red, Anti Condensation, Anti dust, Chemical resistant properties and ...
-
Manufactured by Agro-100based in CANADA
Agro-Mag is a liquid nutrient designed for foliar application in order to prevent and treat magnesium deficiencies, an essential element for photosynthesis and other plant metabolic processes. The magnesium is complexed with organic acids found in the plant, providing Agro-Mag with a great capacity of absorption and mobility in the ...
-
Manufactured by Munckhof Fruit Tech Innovatorsbased in NETHERLANDS
Munckhof’s Triple Fan Orchard Sprayer is especially suitable for good permeability of the crop at extreme culture heights and widths. Due to the cross-flow construction and the two additional fans with adjustable outflow, the Triple Fan Orchard Sprayer offers a guaranteed distribution of the crop protection agent, even under the most severe conditions. Of course the Triple Fan meets the ...
-
Manufactured by HORSCH Maschinen GmbHbased in GERMANY
Solidly designed frame made of quality steel. Optional: air-suspended axles with level compensation. Solid drawbar connection for large clearance, top or bottom connection, depending on the vertical load. Steering axle for stable positioning of the boom with high stability and exact tracking to avoid tramline damage. Optimal, even in uneven terrain. Large steering angle due to a taper-cut frame ...
-
Manufactured by Ricca Andrea & C. SNCbased in ITALY
Hydraulic log splitter with vertical working position. With exclusive centering control by pedal. Their strenght and simplicity will surprise you. They take up very little space and they are always ready to ...
-
Manufactured by Oxbow Carbon LLCbased in USA
Not all gypsum produces the same high quality drywall and cement. Knowing the difference between inferior and high quality is just one of the reasons to work with Oxbow to deliver your gypsum requirements. With extensive experience in the marketing and transportation of Mexican gypsum, Oxbow Energy Solutions LLC can supply high quality gypsum at the lowest cost to the Pacific Northwest, Western ...
-
Manufactured by Docma S.r.l.based in ITALY
The SF110 log splitter has a variable support surface. It is produced in all versions and is the traditional choice. It is an extremely reliable and professional tool that requires no ...
-
Manufactured by LIMK Ltd.based in BULGARIA
The telescopic gates manufactured by LIMK are hot-dip galvanized. The gates are made from two parts - basic and mobile module. The two parts go one inside the other and you no longer need to have the right sizes to insure gate or barrier for your ...
-
Manufactured by Kootenay Tractor (Kootrac)based in CANADA
Cummins 6BTA5.9 (177 HP) Engine. Sundstrand 90 Series Hydraulic Drive Pumps. Poclain Hydraulic Drive Motors. Sundstrand 45 Series Load Sensing Hydrauclic Accessory Drive Pump. Pilot Hydraulic System. Variable Power and Speed available to either track at all times. Counter rotation available. Steering more positive because of finite power to each ...
-
Manufactured by KW Automationbased in AUSTRALIA
Needs description Optional - 240v or 415v. Approximate Specifications: Needs ...
-
Manufactured by ALMAbased in FRANCE
The SELECTA 3 incorporates the latest ALMA innovations: shaking, conveying, sorting, and steering. 50% less expensive than a self-propelled harvesting machine, it offers harvesting quality equivalent to a self-propelled machine with outstanding driving comfort. The SELECTA 3.3 offers a very good cleaning thanks to power plant of cleaning on each of the hoppers. It differs for its side mats and ...
-
Manufactured by Vigorena CVBAbased in GERMANY
Vig-O-Comfort hutch for 6 calves, Dimensions: hutch : 300 cm x 240 cm x 200 cm, Weight: 135 ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you