Vermeer Agricultural industry Equipment available in Zimbabwe

Vermeer continues its dedication to delivering highly innovative, fuel-efficient equipment with the BC1000XL brush chipper. Complete with an 89-horsepower (66.4 kW) GM 3.0L gas engine, the chipper is powered by a dependable electronic fuel injection (EFI) system. The BC1000XL also features a direct electronic pressure regulator that allows for ...

By Vermeer based in Pella, IOWA (USA). from Brush Chipper Product line

Engineered for an ideal balance of power and agility, the slim SC852 stump cutter can glide through a standard 36”/91.4 cm gate and still deliver 85 hp/63 kW of stump-grinding power. The Yellow Jacket Cutter System helps extend pocket and tooth life and facilitates routine maintenance. All-wheel drive, varying speed and heavy-duty rubber ...

By Vermeer based in Pella, IOWA (USA). from Stump Cutter Product line

The compact TS3300 enhances productivity for landscapers, tree care specialists, orchard farmers or nursery operators. Mount it to most skid steers. Its shorter towers and narrow profile let you work between tight rows and under low-hanging branches, to dig, lift and transport trees up to 3”/8 cm in diameter. Locking gates keep the machine ...

By Vermeer based in Pella, IOWA (USA). from Tree Spade Product line

The Vermeer TS44T tree spade has earned a top spot in the industry because of its innovative design and high-quality construction. With a wide rear-gate opening, the TS44T minimizes tree damage. A hydraulic tongue extension improves maneuverability, and maintenance is no problem with the replaceable wear bars and bolt-on spades that reduces the ...

By Vermeer based in Pella, IOWA (USA). from Tree Spade Product line

Cut down your mowing time with the heavy-duty, center pivot TM1400 trailed mower. It mows a remarkable 18’/5.5 m with staggered and overlapped cutter bars so you achieve complete cutting action right down the middle. When the field is done, the TM1400 folds to a transport width of only 8’6”/2.5 m. Each of the 14 discs is ...

By Vermeer based in Pella, IOWA (USA). from Trailed Mower Product line

The self-propelled CT1010TX is a great choice for compost operations wanting to optimize space. With its patented elevating-face technology, the CT1010TX lifts, inverts and aerates organic material on a single pass. Equipped with an optional side discharge conveyor and SmartTrack advanced ground drive control system, the CT1010TX allows for ...

By Vermeer based in Pella, IOWA (USA). from Compost Turner Product line

The CT612 converts to transport mode quickly for easy highway towing between job sites. Built with a heavy-duty frame, the CT612 features a large-diameter drum that aerates compost to help you work more efficiently and effectively. Features a 6’ x 12’ (1.8 m x 3.7 m) windrow that can handle up to 1500 tons/hr (1360.8 metric tons/hr).

By Vermeer based in Pella, IOWA (USA). from Compost Turner Product line

For residential or municipal stump removal, the SC372 goes to work with a combination of power and agility. Its compact frame can navigate tight spots, but doesn’t leave a big footprint. An optional AutoSweep system boosts productivity, while electric clutch engagement eliminates the need for manual adjustments.

By Vermeer based in Pella, IOWA (USA). from Stump Cutter Product line

Powerful enough to handle large, land-clearing projects but narrow enough to fit through a standard 36”/91.4 cm gate, the SC1152 stump cutter is loaded with innovative features. Variable speed saves you time on the job. Joystick controls are easy to master. Super-sized 27”/68.6 cm cutting wheel swiftly grinds away stubborn hardwood ...

By Vermeer based in Pella, IOWA (USA). from Stump Cutter Product line

Our second generation of the Vermeer whole-tree chipper, the WC2300XL, has the same amount of power as our first generation whole tree chipper, but has more bite for when working in more challenging material thanks to its enhanced infeed. By increasing the infeed roller diameter to 28” (71.1 cm) the WC2300XL offers superior productivity ...

By Vermeer based in Pella, IOWA (USA). from Tier 4i (Stage IIIB) for Whole-Tree Chipper Product line

The new Vermeer BC900XL brush chipper was designed to eliminate the guesswork out of chipping. No chucking. No ducking. Just smooth chipping performance. Able to chip heavily branched material up to 9” (23 cm) in diameter and 14” (35.5 cm) wide, the BC900XL is ideal for line clearing and general clean-up needs. In combination, the ...

By Vermeer based in Pella, IOWA (USA). from Brush Chipper Product line

Simple, durable, versatile – the all-new BPX9000 from Vermeer combines the things you want and need in a bale processor. The easy to operate machine is built tough, produces even, consistent feed with minimal maintenance, and the optional large square bale kit offers the versatility you need. Blow away dust and mold from the bale, and feed ...

By Vermeer based in Pella, IOWA (USA). from Bale Processor Product line

With the addition of the RTX450 to the RTX lineup, contractors can choose from a full Vermeer lineup of quad track units to help them maximize their productivity in adverse conditions. The RTX450 is offered in three configurations: the standard duty axle outfitted with a 26” (66 cm) tire option or the heavy duty axle 29” (73.7 cm) tire ...

By Vermeer based in Pella, IOWA (USA). from Ride-On Tractor Product line

The walk-beside, center-articulated PTX40 plow/trencher is designed for installing fiber optic, electrical, gas and irrigation services and meets the needs of underground utility contractors, municipalities and landscaping professionals. Powered by a 46.8 hp (34.9 kW) Kubota liquid-cooled gasoline engine, the PTX40 provides maneuverability, ...

By Vermeer based in Pella, IOWA (USA). from Plow/Trencher Product line

With a 6' 9'/2.1 m cutting width, the 5040 disc mower is designed to cut acre after acre with minimal maintenance. The exclusive Vermeer bi-shaft design provides each disc with its own set of gears, bearings and lubricants – and the gears stay in the grease, even when mowing at angles. Extra wide skid shoes eliminate pinch points to protect ...

By Vermeer based in Pella, IOWA (USA). from 3 Point Disc Mower Product line

Get great-looking bales quickly and easily. It all starts with the Vermeer R2800 twin rake, which produces box-shaped windrows. Built to last, the R2800 allows you to adjust the width of the windrows to match your baler. Control the width, basket lift and folding/unfolding systems right from the cab of your tractor.

By Vermeer based in Pella, IOWA (USA). from Twin Rake Product line

Get faster dry down with the “bottoms up” action of the TE170 Tedder. The exclusive Vermeer hooked double tines work together, picking up the drier material on the surface while flipping the wetter material on top, gently separating lumps. Built low for added stability when tedding on slopes, the TE170 is ideal for smaller operation, ...

By Vermeer based in Pella, IOWA (USA). from Tedder Product line

With extra maneuverability that lets you make tight turns, the TE250 Tedder features the exclusive Vermeer hooked double tines that flip your crop instead of blending it for faster dry-down. Get a full 25'/7.62 m of tedding action along the stable double-framed tedder arms. Pivot points along the driveline allow the tedder to flex along the ...

By Vermeer based in Pella, IOWA (USA). from Tedder Product line

Cutting 10' 6'/3.2 m swaths to make short work of any landscape, the Vermeer 8040 disc mower features the exclusive tri-shaft design for long-lasting performance. Each disc is self-contained with its own set of gears, bearings and lubricants – and the gears stay in the grease, even when mowing at angles. Extra wide skid shoes eliminate pinch ...

By Vermeer based in Pella, IOWA (USA). from 3-Point Disc Mower Product line

The secret to good bales starts with, box-shaped windrows. That’s what the Vermeer R2300 TwinRake is designed to produce. Built to last, the R2300 allows you to adjust the width of the windrows to match your baler. Control the width, basket lift and folding/unfolding systems right from the cab of your tractor.

By Vermeer based in Pella, IOWA (USA). from Twin Rake Product line