Aysix - Model DTG30 Series - Sanitary Digital Temperature Gauges
From Temperature - Industrial & Sanitary
The series DTG30 can be factory calibrated to customer specified temperature range. As with any other MIST™ series sensor, the DTG’s built-in programmable transmitter can be re-scaled and re-calibrated using the optional PC interface module and software. Housing, probe and fitting material are all fabricated from Stainless Steel 316. Standard extension cables are offered in PVC, Silicone, Teflon insulated or stainless steel armored jackets.
-
Most popular related searches
The series DTG30’s arrive factory scaled and...
The series DTG30’s arrive factory scaled and calibrated to the customer’s specified temperature range. No costly field calibration is required. If the application changes, the DTG can be re-scaled at any range within the sensor limits while maintaining its accuracy. No re-calibration requiring costly temperature baths is necessary. Re-programming is done with the optional PC interface module and software.
Features:
- Sanitary 3-A approved
- Large 4-digit red LED display
- Field re-programmable with optional PC interface module & software
- Security password and tracking protection for re-programming and re-calibration
- 4-20mA programmable linearized signal output
- Utilizes self-calibration feature for accurate and stable performance
- Utilizes Pt-100 Ohm RTD Class A element for temperature sensing
- Micro M12 male plug or cable gland for electrical connection
- IP 65/ NEMA 4 rated environmental protection
- All stainless 316 construction
- Easy installation with various mounting conï¬gurations
Benefits:
- For sanitary 3A applications
- Ideal replacement for bi-metal, liquid bulb and gas thermometers
- Resistant to water spray, moisture and vibration
- Milk and dairy
- Pharmaceutical
- Food Preparation
- Pasteurizers
- Sterilizers
Specifications
General Specifications
- Power Supply: 9-36 VDC, polarity protected
- Supply effect 0.005 % / V
- Power consumption 15mA @ 24 VDC + output current - 950mW max.
- 20 mA @ 24 VDC for PNP output - 500mW max.
- 20 mA @ 24 VDC + sourcing current for NPN output
- 50 mA @ 24 VDC for Relay Output - 1200mW max.
- Current Output 4-20mA (3 wires configuration) linear to temperature.
- Max load on current output: (Vsupply - 9V) / 20mA (Ohms)
- Switching Output: Relay SPDT 0.5A @ 240 VAC
- Switching Logic N.C. or N.O. Software selectable.
- Isolation: 500 VDC Input / Output (between probe and output signal)
- Electrical Connection: Micro-DC male plug or cable only
- Sensing Element RTD, Type Pt100 DIN EN 60751, Class A
- Temperature Ranges Customer re-scalable between -200 C to 600C or -50C to 200C
- Switching Ranges Customer programmable between -200C to 600C or -50C to 200 C
- Hysteresis Customer programmable, 1% of range by factory setting
- Accuracy +/- (0.25C + 0.40% of reading) max. with default calibration
- Open circuit detection: Upscale (22mA) or Downscale (2.5mA) current output
- Warm-up 30 seconds
- Response Time 0.5 sec to 30 sec (software selectable)
- Display 4-DIGITS LED, decimal point selectable by software
- Display Resolution +/-0.02% F.S. +/-1 DIGIT RFI effect : 1% or less typical
Customer reviews
No reviews were found for Aysix - Model DTG30 Series - Sanitary Digital Temperature Gauges. Be the first to review!