- Model 1028-s - Large Bale Loader


The Mil-Stak large bale loader was invented and patented by a custom hay stacking operator.  His goal was to design a fast, simple method to load and stack large square bales with his New Holland® bale wagon and yet retain the ability to quickly switch back to small bale loading. The model 1028-s is designed with a solid, non-adjustable frame to fit 3x3 bales and includes a two spring cushion bumper.

By utilizing your bale wagons existing controls, the operator can quickly and easily load a tight, uniform stack of large square bales. With the Mil-Stak clamp installed on a New Holland® BW series or newer wagon the stacking process is fully automated. Simply drive to a bale, activate the clamp squeeze function, and the computer will take over. After the clamp has loaded the bale on the first table, it will return the clamp to the ground while you focus on driving to the next bale. Stack patterns can be set for many different stack patterns in both 3x3 and 3x4 bale sizes.

Once the initial install is done, you will be able to switch between large and small bale mode in less than half an hour by simply removing a few bolts bolts and hydraulic quick couplings. On the BW28/BW38 and H9880/H9870 wagons the New Holland® computer will automatically recognize when the Mil-Stak clamp is attached and enable the large bale stacking functions and stack patterns.

Converting your stack wagon from small bales to big bales used to be a big decision for many hay producers because once it was done, it was costly and difficult to undo. Mil-Stak has taken great care to design a large bale conversion kit that does not damage your New Holland® bale wagon. Everything is either bolted on or plugged in. There is no welding on your bale wagon and no wires cut.  Starting in 2009, New Holland® H series wagons are factory ready for the Mil-Stak clamp. Initial installation of the clamp may be done by Mil-Stak or one of our experienced dealers. If you are interested in installing one of our clamps yourself, please see our downloads page for installation manuals.

Mil-Stak is the only large square bale conversion kit for your New Holland® bale wagon that still allows small bale loading!

Note: As of 1/1/2015 Mil-Stak no longer stocks the necessary parts to install on New Holland® wagons older than a 1095/1089 series.

1068's, 1069's, 1078's, and 1079's are limited to ten 3x3's or five 3x4 bales per load because the distance from the back of the cab and the front of the load rack is shorter than on all other New Holland® bale wagons. This shorter distance makes it possible to only place two 3x3's or one 3x4 on the second table at a time.

1075's and 1085's are limited to twelve 3x3's or eight 3x4's per load because their load racks are shorter than the other New Holland® bale wagons. The shorter load rack only allows you to make a 4 high stack of either 3x3's or 3x4's.

Mil-Stak also does not recommend loading or hauling 4x4 bales with a New Holland® self propelled bale wagon. The Mil-Stak clamp itself can handle 4x4 bales but the hydraulic cylinder which lifts the second table does not have enough force to lift the second table and transfer two 4x4's to the load rack.

Mil-Stak bale clamps are not compatible with any bale wagon that is not listed in the chart above. This includes the New Holland ® 1046, 1048, 1049, or any of the New Holland® pull type bale wagons.

Customer reviews

No reviews were found for Bale Clamps - Model 1028-s - Large Bale Loader. Be the first to review!