Baron - Model 4240T and 4245T - Trail Behind Bale
From Bale Baron
The tractor assisted Bale Baron 4240T and 4245T trail behind models are the original concept and have remained a popular choice as a one pass system especially suited to smaller acreages. These units conveniently tow directly behind the baler and utilize an articulated chute to guide bales directly off your existing baler. The unit is powered by either the remote hydraulics on the tractor or by an optional power unit.
-
Most popular related searches
Features
The RegenValve is a TURBO for your hydraulics. By way of the plunger circuit the RegenValve increases the speed of the plunger.
Service 16 grease points of the plunger all at once with the valve and hose system of the Central Lube Block. A network of hoses reach 16 grease points giving you consistently even application from one central location.
Storage for 16 balls of twine means you can bale more than 5000 small square bales before needing to refill the cabinets. Plastic twine is one of the most efficient binding options available. Plastic twine is easy to buy, cost effective and user friendly for producer and end user.
The Bale Baron uses the proven low maintenance Rasspe knotter for reliability and easy serviceability. Sealed knotter components keep dirt out and grease in, requiring grease only once a year. Missed ties have an audible alarm.
Once tied, each bundle exits the Bale Baron down the roller ramp and gently onto the ground. The roller ramp is equipped with a compression spring to assist the operator when pinning up the ramp. Add a roller chute extension for stationary baling.
The aggressive traction of the Bale Barons perforated turn-table grabs the bales as they exit the baler giving excellent side hill performance.
Two dual heavy-duty front caster wheels for increased stability and flotation. Hollow rubber block suspension on casters for smooth trailing.
Built-in signal lights and reflective side detailing for farm to farm road or highway trailering.
The Smart/Solve system runs using a PLC that constantly monitors and warns the operator when needed. Smart/Solve provides user friendly command and alarm messages for the operator.
Options
The 3 Point Hitch Mounted PTO Power Unit is designed to be used in conjunction with a baler and trailed Bale Baron. This unit allows older tractors to be used to run the Bale Baron that may not have the hydraulic capacity but have the horsepower to do the job.
42 h.p Kubota turbo diesel c/w 30g.p.m. Hydraulic, torque limiting, load sensing pump. Rotary screen pre-cleaner keeps radiator clear of chaff. No hydraulic remotes required for 4240T, 2 set of hydraulic remotes required for 4240P.
This kit allows you to choose the standard 21Pack, 18Pack or 9Pack bundle. The kit consists of telescoping endgates which change from 21Pack to 18Pack or 9Pack with the pull of a pin. Hydraulic expeller rollers are needed to move the 9Pack onto the roller ramp and are recommended for the 18Pack bundle.
Optional 19/45-17 10 ply tires are available on the rear axle. These wider tires offer increased traction and better flotation in muck soil or wet conditions.
Customer reviews
No reviews were found for Baron - Model 4240T and 4245T - Trail Behind Bale. Be the first to review!