- Model M18R - Brush Chipper

From

0

The Beever M18R Brush Chipper boasts a huge list of options to customize the machine as well as more standard features than any other chipper in its class. The unit can be outfitted with a four- or six-cylinder diesel engine and choice of single axle, tandem axle or single axle dual wheel package. With its large capacity and high-production volume reduction capabilities, the Beever M18R Brush Chipper is perfect for residential tree services, vegetation management, lot and land clearing, maintenance contractors and municipalities. The 36″ diameter chambered air impeller system with controllable air flow vents increases chip throwing velocity and easy discharge of light, leafy material. Like all Morbark equipment, the M18R is a long-lasting, durable machine backed by a world-class parts and service support team.

Image

TorqMax Feed Wheel

The TorqMax dual feed wheel compression system provides more than 7,500 lb./ft. of material pulling force.

Image

Infeed

The 65″ wide x 40 9/16″ high infeed chute with 31″ wide x 18″ high throat opening allows for easy feeding of a variety of materials and reduces saw labor.

Image

Reversing Auto-feed

The reversing auto-feed system automatically stops forward feed and briefly backs material away from the drum for optimum engine performance while chipping.

Image

Hydraulic Down Pressure

The Variable Force Hydraulic Down Pressure System eliminates the use of springs and creates 700 lbs. of perpetual down pressure.

General

Chipping capacity: 18″

Height: 9’5″
Width: 7’7″
Length (single and tandem axle): 19’8″

Gross weight: 10,200 – 12,200 lbs.
Suspension: Single Axle: (1) 10,000 lb. torsion
Suspension: Dual Wheel: (1) 12,000 lb. leaf
Suspension: Tandem Axle: (2) 8,000 lb. torsion

Infeed Opening: 65″ wide x 40 9/16″ high
Throat Opening: 31″ wide x 18″ high

Drum: 37 ½” diameter x 23 ¾” wide

Engine: CAT, Cummins or John Deere
Horsepower: 130 – 275 HP

Fuel capacity: 44 gallons
Hydraulic oil capacity: 41 gallons

Frame: 2″ x 6″ tubular

Tires (single or tandem axle): 235/75Rx17 ½”
Tires (dual wheel): 245/75Rx16″

Hitch: 2 ½” Pintle

Equipment Highlights

37 ½” diameter x 23 ¾” wide, four dual-edged knife staggered-pocket drum with patented EZ Drum removable knife holders, Vortex chambered air impeller system and controllable air flow vents.

Dual horizontal feed wheels with TorqMax top feed wheel compression system, hydraulic lift assist and Variable Force constant hydraulic down pressure system with additional manually applied hydraulic down pressure at the valve handle.

Live hydraulic system including: ball valve, pump, motor, and valve bank with additional pre-plumbed valve section for installation of an aftermarket winch package.

360° manual height-adjustable discharge

Direct-drive bottom feed wheel

Morthane Paint System: A chemically cured, electrostatically applied urethane coating with high-gloss finish, built-in UV protection, chip and chemical resistance and corrosion protection.

Options

  • Variable speed flow control
  • Folding infeed tray with spring lift assist
  • Turnbuckle for discharge height adjustment
  • Discharge clean-out door on bottom
  • Winch package: heavy-duty, 5,000 lb. pull capacity with rope and 10′ chafe guard
  • Babbitted-knife staggered-pocket drum
  • 12,000 lb. leaf spring axle with electric brakes
  • electric break-away actuator
  • 235/75R 17 ½” 16-ply tires and rims (for single axle, single wheel)
  • Dual 10,000 lb. rear jacks mounted on roadside and curbside
  • Wireless 15-function, 900Mhz remote control with tethered back-up system
  • Custom paint and logo packages
  • Knife saver tool
  • Engine stop on infeed
  • Material pushing tool
  • Spanish and English safety decals

Customer reviews

No reviews were found for Beever - Model M18R - Brush Chipper. Be the first to review!