Bijur Delimon - Model AeroFlow - Lubricators
From Single Line Systems
AeroFlow Lubricators are pneumatically actuated piston pumps designed for use with single line parallel injector systems. These lubricators are normally connected to the compressed air supply found on the machinery or vehicle being lubricated.
Features
- Economical and simple design allows for trouble-free operation
- Lightweight lubricator is ideally suitable for on-road transport vehicles
- Spring loaded reservoir follower provides for an air free supply of grease to the pump
- Quick coupling at base of reservoir facilitates easy refilling of reservoir
Application
Typical applications for AeroFlow Lubricators range from mobile transport vehicles and trailers to small off-road construction equipment. This economical lubricator is also suitable for industrial applications, including, but not limited to: packaging, food processing and plastics machinery where a compressed air supply is available.
Operation
Air introduced to the lubricator’s air inlet cylinder forces the main piston upward, applying pressure to the grease stored in chamber. The pressurized chamber forces a fl apper valve against its seat. The suction channel to the reservoir is thereby closed. Grease is discharged from the chamber through an outlet check valve to the main line of the system and onto a network of grease injectors. Pressure at the return valve prevents the main line from venting through the return channel. Once optimum pressure is obtained via a timed setting or pressure switch detection, air is exhausted from the air inlet cylinder allowing the spring to return the main piston. At this time the fl apper valve is released and grease is drawn back into the discharge chamber from the reservoir. The main line is vented through the return valve allowing the injectors to reset, ready for the next discharge cycle.
Technical Data
- Reservoir Capacity : 2 liter (4 lb), 4 liter (8 lb)
- Grease : NLGI grade 000-0
- Maximum Inlet Air Pressure : 160 psi (11 bar)
- Pressure Ratio : 9:1
- Typical Operating Pressure : 1050 psi (72 bar) at air pressure of 115 psi (8 bar)
- Discharge (see Figure 1) : 42cc/stroke (2.6 cu. in./stroke)
- Outlets : 1 outlet
- Operating Temperature : -13°F to 176°F (-25°C to 80°C)
Customer reviews
No reviews were found for Bijur Delimon - Model AeroFlow - Lubricators. Be the first to review!