Marden Agricultural Industry Equipment Available In Virgin Islands
-
Manufactured by Marden Industriesbased in USA
HP requirements 150 - 200 Crawler. 4 Individual arms. Approx WT 9,500lbs. Four-Arm Ripper/Coulter Plow with rear mount single cylinder fold up lift. This unit while operating on a float can maintain a continuous 18' to 24' ripper depth while contouring. The CRP154 has a bed width of 84'. HP requirements 150 – 200 Crawler. 4 Individual arms. Approx WT ...
-
Manufactured by Marden Industriesbased in USA
Series Plows come in either 2 arm or 4 arm configuration with a drawbar. Ripper/Coulter Plow comes standard with packer drum located in wheel transport. HP requirement 150 – 200 ...
-
Manufactured by Marden Industriesbased in USA
HP requirements 120 - 150 Crawler. 2 individual arms. Approx WT 5,500 lbs. Two-Arm Ripper/Coulter Plow - with rear mount single cylinder fold up lift. This unit while operating on a float valve can maintain a continuous 16' to 18' ripper depth while contouring. The CRP122 has a bed width of 30' and is designed to minimize erosion and still cover the rip line for row definition. HP requirements ...
-
Manufactured by Marden Industriesbased in USA
Heavy Duty Middle Buster Plow comes in a 4 point lift model which is suitable for the SK300, SK250 and CAT545 tractors. This unit is designed for the heavy palmetto and gallberry sites associated with north Florida and south Georgia. 5 Individual arms and 40' ...
-
Manufactured by Marden Industriesbased in USA
Mid-Range Middle Buster Plow which is a 4 point lift unit that is designed for the CAT525 or JD748 tractors. This unit also gives full tillage while bedding and works well with the mid-range size of skidders. 5 Individual arms and 40″ travel. HP requirements 150 – 200 ...
-
Manufactured by Marden Industriesbased in USA
HP requirements 60 to 150. Single Drum units are available in many different drum diameters and widths. With optional hydraulic wheel lift. These units can also be transported readily on ranch ...
-
Manufactured by Marden Industriesbased in USA
Two-Arm Ripper/Coulter Plow with rear mount single cylinder fold up lift. This unit while operating on a float can maintain a continuous 18″ to 24″ ripper depth while contouring. The CRP152 has a bed width of 50″. HP requirements 150 – 200 Crawler. 2 individual arms. Approx WT ...
-
Manufactured by Marden Industriesbased in USA
HP requirements 100 - 200. Tandem Hydraulic units are a preferred choice in Pasture Renovators due to the two drums working in an offset arrangement. These units give you a lifting mulching action which allows water and air to go directly to root zone and increase density per acre. HP requirements 100 to ...
-
Manufactured by Marden Industriesbased in USA
HP requirements 200 - 300. Heavy Duty (B-Series) Tandem units have many of our Brush Cutter features such as boxed angle frame, wide flange beams and extra large bearing and axle systems. Pound for pound these units have more structural strength than any of our competition. HP requirements 200 to ...
-
Manufactured by Marden Industriesbased in USA
3 Arm Middle-Buster unit which is being developed for the upper coastal plains. This unit has a bed width of approximately 60″ and with center tillage. It can fracture hard pan soil up to 10″ in depth. 3 Individual arms and 40″ travel. HP requirements 125 – 150 ...
-
Manufactured by Marden Industriesbased in USA
HP requirements 150 - 200 Skidder. 125 - 150 Crawler. A Pull Type 5 Arm Plow with center tillage. This plow is versatile and can be pulled with either a Skidder or Crawler. 5 Individual ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you