Brush Master - Model BM83-88D - Commercial Brush Clearing Slope Mowers
The BrushMaster was specifically developed to clear property quickly – up to 5 times faster than other commercial mowers. The commerical mower leaves an attractive appearance to the land while retaining trees larger than 4' in diameter. This machine cuts differently from our slope mowing machines. The land clearing BrushMaster pushes brush and trees forward cutting everything close to the ground then runs over the cut materials, recutting them into small clippings that pass through the rear discharge cutting deck. The clippings are left flat on the ground where they quickly deteriorate and fertilize the soil.
Land clearing for residential and commercial development
Clearing for recreational use, including parks, trails and campgrounds
Right of way vegetation control
The cut material mats the forest floor making it passable for vehicles to travel over cut areas, which is an advantage over plowed areas. The root structure of trees and other plant life is not damaged by the BrushMaster. Root damage is the primary reason for erosion after prescribed burning and/or plowings. New growth is not readily flammable for about one year. Animals and birds can get to the ground to feed. They are attracted to and thrive in areas cut by the BrushMaster.
One of the most important results of clearing with the BrushMaster is land beautification. The appreciative public response to the beautification is of immeasurable value to the government agency that has done the work.
Clears land quickly and efficiently!
Clears 1 1/4 acres in an hour or less
Cuts down everything except desirable trees over 4” in diameter - cutting all brush into small clippings that lay flat on the ground for appearances, leading to rapid decomposition.
Clears all of the heavy brush, vines, palmettos, and small trees from forested areas – while complying with the environmental demands of protecting the larger trees for possible retention
Maneuverable ”zero turn radius” machine that effectively clears the area, so that little or no hand labor is required
A machine that requires very little maintenance - while providing long life
It also works on slopes up to 32° and comes standard with a powerful 83 HP Yanmar, liquid-cooled diesel engine driving three hydraulic blade drive motors and dual hydro-static transmissions that allow the zero turn capability that is so necessary for efficient clearing. The 88' front mount, triple blade, rotary deck clears everything in its path, making this machine perfect for right of ways, parks, trails, survey lines, wildland-urban interface areas and the removal of brush.
This slope mower is so reliable that it is supported by a one year warranty. For highest efficiency, lowest labor, minimum maintenance and longest life – get the BRUSHMASTER!
Remove underbrush and trees up to 4' in diameter
Reduces undergrowth into small cuttings that lay flat on the ground, deteriorate in weeks fertilizing the soil
Does not damage the environment
Improvement of forested areas to create and maintain areas where appearances are important
Prepare and maintain areas to be used by people (camp grounds, parks, nature trails)
Preparing for development of property
Preparation for sale of property
Clearings for security
Cut: 88” cut, hydro-static, rear discharge, out-front rotary
Cutter Type: Rotary - 19” x 6” puncture proof casters support the cutter deck from the front of the machine
Cutter Assembly: 1/4” thick steel cutting deck
Cutting Height: 4” to 10” height adjustment
Blades: Three (3) 3/8” thick flat blades, with 1 1/2 diameter shafts
Engine: 83HP Yanmar Turbo-Charged diesel engine, water cooled
Slope: Slope mowing to 0° to 32°, designed and tested. Has a low center of gravity for safety on slopes
Steering: Self propelled skid steered through twin, closed loop hydraulic drive systems
Maneuverability: True “zero turn radius” (ZTR)
Tires: 44” x 18-16”, 8 ply rated tires
Seating: Operator is seated at the rear extremity of machine for safety
ROPS: Four point certified Roll Over Protection System (ROPS) with retractable seat belt
Hydraulics: Independently powered hydraulic skid steer wheel drives with hydraulic pumps and motors, and hydraulically driven cutter deck
Oil Reservoir: 52 gallon hydraulic oil reservoir, oil/air separator, to prevent foaming, overheating, and water intrusion from condensation
Diesel Fuel Tanks: 28 gallon; dual diesel fuel tanks on the front of the machine, away from the operator, designed to operate on steep slopes
Cab protection enclosure:
- Right and left doors with metal frames
- Expanded metal in the two door openings and the rear opening for protection from protruding limbs
- Screens behind the expanded metal to protect the operator from yellow jackets and wasps
Air conditioning with lexan sheeting replacing the screens
- A recirculating closed system air conditioner to protect the operator from smoke and other contaminents.
- Cab protection enclosure must be purchased for the air conditioning upgrade. Lexan sheeting covered by metal guarding replaces the screens from the cab protection enclosure.