- Model SM60 - Side Mounted Rotary Cutter

From

0

The rotary cutter for those hard to reach places. Bush Hog’s SM60 is your ideal choice for mowing and maintaining rights of way, drainage ditches, lake dams, embankments and sloping terrain. Available in either 540 or 1,000 RPM models, the SM60 features a 5-feet cutting width, and it attaches to your tractor with a Category ll standard or Category ll & lll quick hitch. Expand your mowing potential with the Bush Hog SM60 Rotary Cutter.

Performance Features
  • 145 Inches Of Reach
  • Ideal For Ponds & Ditch Maintenance
  • Operates From 85° Down To 90° Up
  • Self Contained Hydraulic Drive
  • Anti-Cavitation device to protect your cutter’s hydraulic system
  • High blade tip speed for a cleaner cut in all conditions
Construction Features
  • 10-gauge deck with 10-gauge x 8-inches side bands
  • Anti-Cavitation Protection
  • Direct drive to hydraulic pump (Cast Iron)
  • Double-edge blades are 1/2-inch x 4-inches
  • Round bladeholders allow the cutter to

Safety Features

  • WARNING: For non-agricultural use, OSHA, ASAE, SAE and ANSI require the use of chain guards or other protective guards at all times. Bush Hog strongly recommends the use of such guards for agricultural use as well, to reduce the risk of property damage, serious bodily injury, or even death from objects thrown out by or from contact with the cutting blades.

Cutting Width 60-inches
Cutter Head Movement 90° Up to 85° Down
Transport Width 126-inches
Driveline ASAE Cat. 4, 540 or 1,000 RPM
Type Hitch Cat. II Standard, Cat. II & III Quick Hitch
Hydraulic Pump Mounting Machine only, pto drive
Cutting Capacity 1-inch
Hydraulic Oil Capacity 3-gal., factory filled
Minimum Tractor Weight 6,000-lbs.
Hydraulic Capacity 24 GPM / 540 RPM; 19.1 GPM / 1,000 RPM
Minimum Tractor Lift Capacity 3200-lbs. 24-inches behind lift pins
Overload Protection Hydraulic relief valve
Deck Thickness 10-gauge
Counterweight 275-lbs., standard
Blade Holder Round
Weight 1,675-lbs.
Blade Tip Speed 17,300 FPM / 540 RPM; 18,570 FPM / 1,000 RPM
Maximum Extension of Cutter Head 145-inches from tractor center line
Blade RPM 1101
Extension Arm Travel 31 1/4-inches
Blade Rotation Shipped clockwise, but reversible
Front and Rear Deflectors Standard equipment
Type Blades 1/2 x 4-inches, double edge
Options Side gauge wheel, tailwheel for main frame

Customer reviews

No reviews were found for Bush Hog - Model SM60 - Side Mounted Rotary Cutter. Be the first to review!