J B Edlington & Co Ltd

- Retro Fit Levelling Board System



A roll with a Levelling Board increases the speed of the operation for you. A roll with a levelling board reduces the amount of time you power harrow. The Levelling Board is in front of the roll rings so directs the clods of soil to be cut up, allowing you to form a seed bed. The height of the Levelling Board is hydraulically adjustable while on the move. So with a Levelling Board you now have a roll that does more than one job - so it more cost effective for you. The Edlington Levelling System is a retro-fit to your existing AW roll. Widths available to fit:  6.5m  7.4m  and 8.3m

This combined with a special drawbar mounting, enables the roll to compensate for undulations (waves) it encounters - head on. The HFRAW and the HD models also have large diameter rings - 22' and 24' with automatic wear take up, reduce power and traction requirements and these rings can also break up clods without the need for breaker rings.

The rings are only 3' wide so you get more than a third more peaks than usual,  and if you have our breaker rings fitted - they keep the roll clean without damaging crops. The change over from work to transport is simple. Which makes sure you don't scuff up your field near the gate. The frame is built with 6-8mm thickness box section steel.The roll is mounted for both transport and work on a bar between the two lower lift arms of the tractor.

When changing from working to transport position lift up the wings to the vertical position and then put the locking pins into the hole on the wings. Then put on the stabiliser bars on the back of the roll onto the pins and put the pins in the holes.This machine is manufactured in the UK by a long established family company.More details are in our leaflet including prices - PDF format - which you can download using the link on the left.

Customer reviews

No reviews were found for Edlington - Retro Fit Levelling Board System. Be the first to review!