Arili Plastik Sanayii A.S

Model Clamp Type - Irrigation System

0

This patented system is produced in the following diameters: Ø90mm, Ø110mm, Ø125mm, Ø140mm and Ø160mm.

Reducer
Used for branching-off laterals in both directions from the main pipe.
It is Produced in:

  • Ø 110x90 mm, Ø 110x75 mm,
  • Ø 90x75 mm, Ø 160/125 mm,
  • Ø 140/110 mm, Ø 140/90 mm,
  • Ø 140/75 mm, Ø 160/100 mm

Elbow 90

  • This PE is produced in sizes
  • Ø 75 mm, Ø 90 mm,
  • Ø 110 mm, Ø 125 mm,
  • Ø 140 mm, Ø 160 mm

Swan Neck
This is an S-shaped PE fitting, which connects the motorpomp to the system with minimum amount of mechanical vibration transmitted to the irrigation system.It is produced in the following sizes:

  • Ø 75 mm, Ø 90 mm,
  • Ø 110 mm, Ø 125 mm,
  • Ø 140 mm, Ø 160 mm

Pump Connection

  • This molded metal piece connects the outlet of the pump to main pipe.It is produced in sizes
  • Ø 75 mm, Ø 90 mm,
  • Ø 110 mm, Ø 125 mm,
  • Ø 140 mm, Ø 160 mm

Hydrant

  • Produced in sizes
  • Ø 75 mm, Ø 90 mm, Ø 110 mm to support the sprinkler nozzles

End Cap

  • End caps close the ends of the pipes at the far ends of the system and where needed.They are produced in diameters
  • Ø 75 mm, Ø 90 mm,
  • Ø 110 mm, Ø 125 mm,
  • Ø 140 mm, Ø 160 mm

Riser
These small pipes, produced in 25cm, 50cm ve 100cm lengths and in Ø32mm and Ø40mm diameters are used for adjusting the level of sprinklers for different sorts of plants

Gasket
Specially produced to fit the gasket grooves of the sprinkler system to be used at high pressures.Available in diameters Ø75mm, Ø90mm,Ø110mm, Ø125mm,Ø140mm, Ø160mm

Tee

  • Used for branching-off the laterals from the main pipe.This PE fitting is produced in various sizes such as,
  • Ø 75/75 mm, Ø 90/90 mm,
  • Ø 110/75 mm, Ø 110/110 mm,
  • Ø 125/125 mm, Ø 160/75 mm,
  • Ø 160/110 mm, Ø 160/125 mm,
  • Ø 160/160 mm

Valve
Valves help to clean sprinkler nozzles without shutting down the whole system.They also help to regulate the sprinklers or to cut-off some,in order to change their location

Cross

  • Used for branching-off laterals in both directions from the main pipe.It is produced in
  • Ø 110/75 mm, Ø 110/90 mm,
  • Ø 110/110 mm, Ø 125/125 mm,
  • Ø 125/110 mm, Ø 125/90 mm,
  • Ø 125/75 mm

Customer reviews

No reviews were found for Model Clamp Type - Irrigation System. Be the first to review!