DACS A/S

- Model VF36/56 - Warm Water Radiators for Poultry and Pig Houses

From

0

The warm water carried heating systems from DACS supplies a large quantity of dry heat to the house. Dry heat is useful both for heating up the house, but also for de-humidification because dry heat can absorb a large quantity of humidity. Especially during the winter months it is important to have full heating capacity available. The performance on the radiator is stated at a room temperature of 32 °C and an average temperature in the radiator of 85°C. All our warm water radiators are equipped with a 0.3 kW blower fan.

Image

Efficient heat input
To get the best, and most even, heat input to the stable the radiators should be positioned with strict focus on the air-flow from the ventilation system. 

We offer the radiator in several sizes. Consult DACS for proper size selection and correct position in conjunction with the ventilation system.

The DACS all steel, galvanized-radiator produces plenty of dry, hot air without any risk of sparks flowing. The heating surface and the assembly rack on the radiator are fully hot dipped galvanized and thus protected against the aggressive environment in a poultry house.

Lasting capacity
It is important, especially during the winter months, to have full heating capacity available. To keep the radiator capacity at optimum rates it is essential that cleaning is easy and efficient, as dust will block the air channels and lead to inefficient and slow heating of the building.

High pressure water cleaning
The DACS radiator, with its 1 mm material thickness on all heating segments will stand cleaning by high pressure water cleaning without bending. The swing-away front panel and a 5 mm spacing between the segments allow for easy access and thorough cleaning. All segments are vertically oriented to ensure complete drainage after washing.

Efficient heat distribution
Each radiator is equipped with a 0.3 kW blower. The system is typically placed on the house end 2.5 - 3 meters from the side wall. This placement gives the most efficient and even heat distribution. When mounted on our standard frame, the radiator sits 40 cm from the wall. A sturdy, galvanized frame mounts directly to the wall and holds the radiator in place.

The frame has been designed to distribute the weight of the radiator to the floor, making installation in almost any type building possible. The system is dimensioned with a very easy water flow inside the heating element which means that only a small circulation pump is needed. This minimizes the energy consumption of the radiator.

The performance on the radiator is stated at a room temperature of 32° C and an average temperature in the radiator of 85°C. The performance of the radiator raises the bigger the difference on the systems incoming water and room temperature is.

Several sizes
The radiators are available in several different sizes. Consult DACS for proper size selection.

Customer reviews

No reviews were found for DACS - Model VF36/56 - Warm Water Radiators for Poultry and Pig Houses. Be the first to review!