Delta-T Devices - Model WET-2 - Irrigation Research WET Sensor
In just 5 seconds the WET Sensor checks 3 crucial variables that influence plant growth: water content, temperature and pore water conductivity (ECp), the EC of the water that is available to the plant.
- Measures Water content, EC and Temperature
- Measures directly within the root zone
- Rapid checks of growing conditions
- Ideal for precision irrigation
The WET Sensor is used throughout horticulture, especially by soft fruit growers and for crops grown in protected environments, where correct growing conditions are critical to both yield and ﬂavour. The compact sensor can be inserted directly into the growing medium with minimal disturbance to either roots or shoots, and provides information for process optimisation, checking growing condition uniformity and precision irrigation.
WET Sensors are normally ordered as a complete kit that includes a WET Sensor, an HH2 Moisture Meter and a handy carry case. There are three types of Kit – each with a different set of substrate calibrations, including coir, peat and mineral wool. Please see below for further information on substrate calibrations and kits.
Where plants are grown in artificial substrates using hydroponic or fertigation systems, nutrients are routinely supplied in irrigation water. Nutrient levels are controlled by monitoring the water content and conductivity (EC) and adjusting the injection of liquid fertiliser into the irrigation water. The Delta-T Devices WET Sensor excels in monitoring this crucial information.
Nutrients are sometimes provided by fertigation but are often provided by Controlled Release Fertilisers (CRF). The rate at which these are taken up depends on several factors, includingthe weather conditions and irrigation regime.
The Delta-T Devices WET Sensor can be used to measure the EC within the growing media and so take much of the guesswork out of this process.
If the irrigation water is recycled or abstracted from rivers and aquiferswith high levels of dissolved salts, over time there can be a build up of soil salinity. Soil salinisation will eventually reduce crop yields. The WET Sensor is fast and efficient for sampling soil salinity, ensuring that farmers have the essential information they need to take remedial action as quickly as possible.
For portable applications, readout and data storage are handled by the HH2 Moisture Meter. Alternatively, the WET Sensor can be connected to a GP2 or GP1 Data Logger, making it possible to monitor growing conditions over a period of hours, days or longer. The GP2 and GP1’s smart relay capabilities allow them to control water content in response to EC or temperature.
WET Sensors used aboard China’s Tiangong-2 Space Station
The WET Sensor has been used by Chinese astronauts to conduct horticultural experiments in space.
WET-2-K1 - WET Sensor Kit WET-2-K1
WET-2/d WET Sensor, HH2 Moisture Meter and carrying case. Supplied with generic mineral, organic, sand and clay calibrations.
WET-2-K4 - WET Sensor Kit WET-2-K4
WET-2/d WET Sensor, HH2 Moisture Meter and carrying case. Supplied with additional substrate calibrations including coir, peat-based potting mixes and greenhouse “mineral” soils.
WET-2-K3 - WET Sensor Kit WET-2-K3
WET-2/d WET Sensor, HH2 Moisture Meter and carrying case. Supplied with basic substrate calibrations plus mineral wool vertical and mineral wool horizontal calibrations.
Standalone Wet Sensor
WET-2/w-05: WET Sensor (bare wires)
Combined water content, electrical conductivity and temperature probe. Includes sensor calibration on CD-ROM. 5m cable.
The WET-2/w is only suitable for use with the GP1 or GP2 Data Loggers and other specially enabled devices.
If additional horticultural substrate calibrations are required, they should be ordered at the time of purchase of the GP1 or GP2 Substrate calibration upgrades are factory installed into the GP1 or GP2 at Delta-T’s premises. Please contact Delta-T Devices for further details.