- Model Series 70 MSD - Auto Reset Slurry Injector

0

Attaches to 4” x 6” tool bar. Auto reset with 1400# reset force. 1-1/4” x 2” edge bent 5160 Alloy Steel Shank. 22-1/2' heavy duty spring coulter. Cast Steel Chisel Point Sweeps. Wind drop, 3”, 3-1/2', 4' O.D. slurry tubes. Separately replaceable sweeps and tubes.

  • Only end of season shank pivot greasing.
  • Snap pin adjust coulter.
  • No set screws.
  • New 800# coulter down pressure spring assembly - most others range from 200# - 350# down pressure.
  • 22-1/2” diameter coulter – not 20”.
  • Auto reset – not spring bundle.
  • 1-1/4' x 2' edge bent shanks - not 1' x 2' flat shank.
  • Narrow 1/2” sweep shank.
  • The 8' sweeps lift the soil less than 1-1/4”.
  • High carbon, special bar quality, cast steel sweep with front Hi Chrome Casting and heavy abrasion resistance hard surfacing on the wings.
  • Tube pivot

  • 70 degree forward angled zerk for easier access.
  • Grease after spring & fall seasons to minimize rust when not in use.
  • Easy - no tools required adjustment.
  • No set screws rusted and broken off.
  • No shafts sliding down.
  • New heavier spring maintains coulter depth to prevent residue hair pinning
  • Heavy spring maintains colter depth to prevent residue hair pinning.
  • Larger 22-1/2” diameter blade provides better cutting action through tough GMO residue than 20 inch.
  • Provides 8” trip clearance and much more resistance to floating.
  • 1400 # trip pressure, plus benefits lower force at full trip.
  • 250% stronger than 1' x 2' flat.
  • 1' x 2' flat shank does not maintain constant sweep angle due to deflection in variable soil conditions.
  • This allows shallow operation resulting in fuel savings. Most tillage apparatus will require 100% more horsepower when operated 50% deeper.
  • Less breakage.
  • Longer wear.
  • Lower cost per acre.
  • Prevents hose damage.

Customer reviews

No reviews were found for Dietrich - Model Series 70 MSD - Auto Reset Slurry Injector. Be the first to review!