DRAINMAX - Tunnel Infiltration Trench System
From Other Products
The solution for decentralized infiltration or attenuation of stormwater and treated wastewater. The DRAINMAX tunnel trench is a lightweight in its class. It allows rainwater to be easily retained or infiltrated on site. The ideal solution for sealed surfaces.
-
Most popular related searches
Innovation
The DIBt®-approval is one innovation of the DRAINMAX tunnel system. It is with 1.6 m³ a large volume and light plastic tray system that creates a hollow space in the soil. With these, the rain water can be directly retained at the source and will infiltrate through the open soil and side holes. It is possible to also restrict the water flow to only the pipe. This technology saves significant costs on laying complex piping systems. You can also use the DRAINMAX tunnel system for infiltration of effluent water from sewage plants.
Cleaning and maintenance - washable floor
Cleaning and maintenance - washable floor
In most conventional infiltration trenches only the irrigation pipes can be cleaned later. However fine dirt particles enter through the slits of the irrigation pipes and then gradually settle down to the bottom and on the walls of these infiltration trenches. In time they lose their efficiency and finally must be dug out when they loss their infiltration capacity. The clever design of the DRAINMAX system means that the essentially important walls and bottom of the DRAINMAX Tunnel infiltration trench can be completely flushed using the special connecting slots. Therefore, a constant level of efficient infiltration is guaranteed for the long run with DRAINMAX Tunnel infiltration trench.
Best price with each m3
Best price with each m3
Best manufacturing, minimum transport volume, minimum space requirement, huge storage capacity and quick installation of DRAINMAX Tunnel infiltration trench gives you the best price per m3 of storage volume that can be attained with plastic infiltration trenches.
Latest manufacturing techniques
The DRAINMAX Tunnel infiltration trench is produced by one of the largest and most advanced thermoforming machines in Europe. In addition to the consistent quality, this also guarantees the lowest possible manufacturing costs and thereby a cheap m3 price for the entire infiltration or attenuation system.
Minimum transportation costs
The DRAINMAX Tunnel infiltration system can be delivered directly from the warehouse to any site in Europe, depending on the project. Up to 40 m3 storage volume can be stacked on one pallet, or 360 m3 per truck or container. You cannot get more efficient than this!
Since today, the transportation costs constitute an enormous share of total costs, you obtain considerable cost benefits by choosing DRAINMAX. Depending on the construction, conventional box-shaped infiltration trenches are required up to 6 times the transportation volume, since their main volume consist of air..
Quick installation
Each tunnel section can be easily carried by 2 people since it weighs only 30 kg. The tunnels are connected by overlapping the edges. An area of 360 m3 can be installed in just 8 hours as this involves only three different component forms. You can obtain more information on installation under: Easy to assemble, install and maintain
Customer reviews
No reviews were found for DRAINMAX - Tunnel Infiltration Trench System. Be the first to review!