EasyKit - Model Benomic Series - Advanced Hydraulic Pipe
From Crop Care
For all these daily jobs where an advanced hydraulic pipe rail trolley is not strictly necessary we introduce our Benomic EasyKit. The biggest challenge for our R&D-department this time was “keep it simple”. Everything that’s not directly necessary for the proper working of a pipe rail trolley you won’t find on this innovative budget model.
Greenhouses have become bigger and therefore the plant rows got longer. As a result of this the need for a variable platform height became less important. A lot of crop-work or other activities are being done on a fixed height. For this reason our Benomic EasyKit is fitted with a manual adjustable platform.
As a result of the innovative, smart design and its simplicity, the price of the trolley is relatively low. For this reason it’s a good alternative for peak times when you are in need of some extra trolleys.
Easy and less maintenance
Because of the smart design and since there is no hydraulic system on board we reduced the possibility of technical problems. Maintenance is quite simple and with an optional service- or spare part kit can be handled within your own company.
A spacious, strong and safe place to work. With the help of a smart guiding system the platform can be manually shifted along the poles and fixed on any desired height. The safety fence around the platform creates a safe working place for your employees.The platform can be manually adjusted (15 cm steps) between 40 cm and
280 cm. Depending on the height you choose the right number of steps.
The Benomic EasyKit is short, light and very easy to handle on the pipes as well on the concrete path. The platform is easy accessible because of a door on each side.
As a result of the low weight of the trolley it’s very easy to maneuver. There is no need for a lifting mechanism. With the both swivel wheels, mounted on one end of the frame steering of the trolley is a piece of cake.
To improve the safety conditions when working with pipe rail trolleys a tilt sensor is optionally installed. This device will warn you with an acoustic signal when the pipe rail system is not level.
(Installation of a tilt sensor depends on local regulations and safety norms)
Motor control / drive system
Like big brother BENOMIC, the EasyKit is equipped with the same, reliable control box which makes it possible to drive back- and forward at any desired speed.
The heart of the drive system is a solid 24 V / 50 Ah electromotor. Equipped with a chain drive system this motor gives the trolley a maximum speed of 40 m/ min.
We installed simple and reliable control switches and foot pedal which makes it possible for anyone to use the trolley.
We will deliver the Benomic EasyKit as a kit which must be assembled on location.
With some simple tools and our manual it will take approximately one hour to get your budget trolley into operation. It comes in an economic flat package which saves transport costs.
Smart adjustable wheel size
Within a few minutes you can adapt the width of the trolleys to the most common pipe rail systems, varying from 42,5 to 80 cm.