Andreoli Engineering S.r.l.

Model FKP - Mounted Sprayer

From

0

FKP is the series of mounted sprayers for the professional management of the chemicals applications on all the types of orchards and vineyards. All the components of the sprayer are designed to have the best quality, efficiency and reliability

Models

  • FKP VAC with axial flow blower.
  • FKP SIMPLEX with centrifugal blower  SIMPLEX designed for espalier shape of vegetation.
  • APC with centrifugal blower and cannon air conveyor, suitable for spraying very high trees,  crops under green houses or arable crops

Blowers

VAC

The last generation of the VAC® blower is the most efficient and powerful axial-flow air conveyor.

VAC blower has a front suction to allow a clean application, avoiding re-circulation of chemicals mist and suction of leaves and dust from the rear.

VAC blower has a perfect system of guide vanes  that eliminates completely the swirl and allows an even, symmetrical application, a very strong penetration into the vegetation and the best resistance to the wind.

The VAC blower generates a very high air volume, thus allowing spraying very high and dense trees.

Axial flow fan  Ø  900 mm with  12 blades with adjustable pitch. 

Two speed gear box

SIMPLEX

The blower system  SIMPLEX® has a very high efficiency and a perfect air volume uniformity on all the air outlets.

Thanks to the symmetric geometry of the air conveyor, every outlet receives  the same high volume. In this way SIMPLEX makes an even and perfectly uniform chemicals application.

All the outlets are independent and adjustable in any direction.

The air outlets movement can be hydraulically assisted on request.

ECO SIMPLEX is available with single blower and 6, 8, 10 outlets, or with double blower and up to 20 outlets for multi-rows spraying.

The blower has a centrifugal clutch for a smooth engagement.

APC

Cannon air conveyor in reinforced fibreglass, centrifugal blower with automatic clutch. Two speed gear box. Cannon hydraulic rotation on request.

Chassis

  • Chassis completely laser cut.
  • AHSS (Advanced High Strength Steel)
  • Galvanized,  completely belly protected.

Spraying equipment

  • Polyethylene tank. Capacities available: 300, 400, 600, 800 litri.
  • Diaphragm pump, brass heads.
  • Manual or electric pressure regulator.
  • Two or more shut-off solenoid valves for the control of the nozzles sections.
  • Double or triple no-drip nozzles holders. All type of nozzles available.
  • Chemicals applications possible with rates from 100 up to 3000 litres/hectare.
  • Stainless steel chemicals pre-mixer, stainless steel can rinser.
  • Chemicals and water filler.
  • Tank mixture agitator with triple flow (over 600 litres/min of volume) allowing a perfect agitation of a dense mixture.
  • Spray components rinse equipment and hand-washing tank.

Controls and automatic controls

  • Manual remote controls or electric remote controls.
  • Electronic tank level and spray pressure display  LCD integrated in the control box.
  • Computer for the automatic control of the spray rates.
  • GPS system.
  • Link  GPS/computer.

Customer reviews

No reviews were found for Model FKP - Mounted Sprayer. Be the first to review!