SPS - Flat Bottom Silos
From Grain Storage
Flat Bottom Silo made high strength steel S350GD, fully galvanized Z-600 (600 gr/m2) with vertical and externally bolted reinforcements. Completely bolted joints with 8.8 bichromated bolts and nuts with rubber washers INCLUDED. Preformed butyl mastic (BSD) to seal connections panels INCLUDED. Fixing plates with fixing bolt/plug to the ground INCLUDED. Ventilation shafts and ladder on roof INCLUDED. Inspection door on the roof and inspection door on the second ring with access platform and interior ladder to access to the bottom of the silo INCLUDED. Access ladder to the roof with protection according to UNE-EN-ISO 14122 and rest platform every 6 meters is OPTIONAL.
- Screwed parts, with washers of neoprene and filler guarantee a perfect water tightness of the set.
- The screw-bolts quality 8.8 of high resistance, di-chromate and corrosion resistant. Outer reinforcements screwed to the wall rings made in structural steel and hot dip galvanized coating.
- Roof with trapezoidal sections with special edgings to guarantee a vacuum seal to bring rigidity to the same one. According to the silo there are placed wind-rings, which serve to give rigidity to the set and to avoid dents in the same one caused by the wind forces.
- Optionally we can offer all kinds of accessories, as access stairs, inspection door on roof of cylinder, catwalks, supports, temperature sensors, ventilation systems, level detectors, anti-snow kit, etc.
- Maximum level detector – pendular
- Minimum level detector – membrane.
- Top support for catwalk.
- Lateral support for catwalk: (T2 – Two bodies).
- Diagonal support for catwalk: (T1 – One body).
- Thermometry System.
- Access ladder to the roof with protection according to UNE-EN-ISO 14122 and rest platform every 6 meters.
- Ventilation grilles on floor (up to 100%).
- Discharge hopper.
- Lateral discharge.
- Manual and motorized slice.
- Single and double catwalk.
- Ventilation kit inside the silo.
- Special reinforced designs for seism, snow and wind.