Tramco

Model G - En-Masse Conveyor

0

En-Masse Conveyor provides years of trouble-free service under extreme applications. All wear parts are easy to replace making the conveyor very maintenance friendly. The MODEL G is frequently used in such industries as chemical, coal, food, grain, municipal solid waste, mining, plastic, paper, pulp and rubber. The MODEL G has been put into service around world by some the world's greatest companies.

  • All conveyor sections are pre-assembled on a level 215ft fixtures, match-marked and dowel-pinned for field assembly. With proper rigging practices, Intermediate Sections can be assembled and shipped in multiples of up to 40 ft. lengths saving on field time.
  • ~3 mils Powder Coat finish. The finish has a good hardness, excellent flexibility, excellent exterior stability, good chemical and solvent resistance, and a very good corrosion protection. All parts are powder coated before assembly. All fasteners are cadmium plated.
  • Drives are pre-assembled with the oil bath chain case fitted and removed for shipment.
  • Oil bath chain cases are split with two top inspection doors, one over each sprocket.
  • All liners use 1/2' welded studs attached to the exterior of the liner plates to eliminate wear points on the inside of the liners.
  • Head and tail housing assemblies are split for easy access.
  • Out-board mounted bearings on the head section.
  • Rex ZT center pull take-up bearings on the tail section. Shaft seals are a Rino adjustable 'packing-gland' split type.
  • 'G' style head sections come with a plug relief door and switch.
  • All internal conveyor sprockets are split, with four lifting holes and hardened to ~420 BHN. Split sprockets can be 'turned around' for double life. 'Walking Tooth Sprockets' used where applicable.
  • Conveyor chains are all cotter-constructed for ease of removal. All links are pre-heated prior to robotic welding of the attachment bars.
  • Conveyor 'By-Pass' inlets have a bolted side plate construction to ease removal/replacement of the internal liner plates without removal of the feed spout and or transition.
  • All intermediate sections are pinned and robotically welded in fixtures to ensure squareness and length.

Image
  • Hinged relief door for conveyor protection
  • Picture of G-Model Head with cover in place and inspection door open.

Image
  • Easily replaceable head carryback (or chain stripper)
  • Double-life working tooth split sprocket
  • Picture of G-Model head without cover

Image
  • Heavy-duty long life pillow block roller bearings
  • Packing gland shaft seal

Image
  • Heavy-duty, engineered class and welded steel chain
  • Steel flight attachment faced with UHMW
  • Full load starting capacity

Image
  • Dowel pins ensure precision alignment
  • ~3 mils Powder Coat finish; protects parts and ensures long life
  • Minimal thermal expansion

Image
  • Abrasion-resistant materials are available for replaceable liners and bottom plates
  • Liners are designed for close tolerance with smooth faced internals and fit
  • Abrasion-resistant materials from 200 to 500 Brinell

Image
  • Double-life working tooth split sprocket
  • Picture of G-Model tail without cover

Image
  • Heavy-duty center pull takeup frame
  • Packing gland shaft seal

Designed to convey a wide variety of materials:

  • Wet, Sticky and/or Oily Products
  • Varying pH Conditions (Both High and Low)
  • Changing Process Densities
  • All Particle Sizes (Certain Limitations Apply)
  • Varying Temperature Ranges
  • Both Abrasive and Corrosive Products
  • High Moisture Products

Possible configurations:

  • Horizontal Conveyor with multiple self-feeding inlets and multiple outlets
  • Incline conveyor (up to 15 degrees) with multiple inlets and multiple outlets
  • Curved conveyor with incline and multiple inlets
  • Design a 'MODEL G' to meet your unique needs now!

Designed to handle various applications:

  • Wet Corn Milling
  • Oilseed Processing
  • Specialty Food Processing
  • Breweries
  • Malting Operations
  • Ethanol Processing
  • Distilleries
  • Meat Byproducts
  • Specialty Processing Applications
  • Sugar Processing

Customer reviews

No reviews were found for Model G - En-Masse Conveyor. Be the first to review!