Genç - Ventilation and Cooling Poultry Control Systems
From Poultry Equipment
Havalandırma,Soğutma Kümes Kontrol Sistemleri. With our expert team, we offer professional solutions to egg producers and organizations. With the EPN-C device ventilation , heating , cooling , feeding , lighting , feed weighing ared one.
Products Details
Usage Areas
- Laying Poultry
- Chick Poultry
Minimum Ventilation
Minimum ventilation is done if the temperature is at an acceptable level, polluted air in the poultry is thrown out and fresh air is taken in. Side fans or chimney fans and ventilation clips are used.
Tunnel Ventilation
When the poultry temperature is above the acceptable levels, both to reduce the temperature in the poultry and to reduce the temperature that the animals feel the wind is created at a certain speed in the poultry house. The pad curtain system and tunnel fans are used for this action.
Except with these two methods different methods of ventilation can be created by programmable designing. The device can be programmed such a way that the increase in readings by humidity, CO2 and NH3 sensors also affects the ventilation.
Pad curtain system control can be done with the help of static pressure sensor to prove both the ventilation and the life of the fans and to reduce the electricity consumption.
Cooling
The pad placed in front of the pad curtains can be wetted with evaporative cooling.
Heating
The heaters in the different sections of the cluster can be controlled according to the temperature values indicated by the sensors associated with them.
Feeding
Automatic feeding control can be done by entering 5 different feeding times and quantities during the day. Also the amount of feed in the silo can be followed by the loadcell entry.
Number of main board input / output:
- Analog Input: 11 units
- Digital Input: 8 units
- Relay: 19 units
- Analog Output: 2 units
Modular Structure:
Up to 4 expansion modules can be connected to the main control board. Each module has the same number of inputs and outputs as the main module board. Also a separate weight measurement card with 6 load cells for weight measurement can be connected.
Different functions can be selected for each input and output. Thus, the device can be adapted to any kind of assembly.
Functions that can be assigned to Analog Inputs :
- Poultry Internal Temperature Sensor ( Maximum 11 pieces selectable )
- Static Pressure ( Maximum 11 pieces selectable )
- Humidity ( Maximum 11 pieces selectable )
- CO2 ( Maximum 1 piece selectable )
- NH3 ( Maximum 1 piece selectable )
- Shutter Feedback ( Maximum 2 pieces selectable )
- Outdoor Temperature Sensor ( Maximum 1 piece selectable )
- Feed measurement sensor (Maximum 2 pieces selectable)
Functions that can be assigned to relays:
- Fan ( Maximum 32 pieces selectable )
- Heater ( Maximum 4 pieces selectable )
- Cooler (Maximum 4 pieces selectable)
- Cooling Shutter Opening ( Maximum 1 piece selectable )
- Cooling Shutter Closing ( Maximum 1 piece selectable )
- Shutter Opening ( Maximum 1 piece selectable )
- Shutter Closing ( Maximum 1 piece selectable )
- Lighting ( Maximum 2 piece selectable )
- Feeding ( Maximum 2 piece selectable )
- Water Suply (Maximum 2 piece selectable )
- Alarm (Maximum 4 piece selectable )
- Humidty (Maximum 4 piece selectable )
Functions that can be selected for Digital Inputs:
- Power Failure ( Maximum 1 piece selectable )
- Electricity Consumption ( Maximum 1 piece selectable )
- Water Consumption ( Maximum 1 piece selectable )
- Feed Consumption ( Maximum 1 piece selectable )
- Reverse Pressure ( Maximum 1 piece selectable )
- External Alarm ( Maximum 4 piece selectable )
Functions that can be selected for Analog Outputs:
- Lighting ( Maximum 1 piece selectable )
- Fan ( Maximum 1 piece selectable )
- Heather ( Maximum 1 piece selectable )
Customer reviews
No reviews were found for Genç - Ventilation and Cooling Poultry Control Systems. Be the first to review!