Gravity Box Augers
From Hydra Fold Auger
Ruggedly constructed with 6 or 8 inch diameter seamless tubing, the Hydra Fold Auger is designed to fit most farmers' needs. The big 8 inch auger will deliver up to 40 bushels of corn per minute, and the 6 inch auger will handle 8 bushel of seed per minute.
- Powered by tractor hydraulic system ...eliminates belts, chains, and gears.
- Finger-tip flow control at both discharge end and tractor seat.
- Variable delivery speed auger swings 180° and folds for narrow or low clearances...available in 11, 14 and 16 foot lengths.
- Easily mounted ...on and off in minutes
Saves Labor, Time and Money
Let your tractor power fill your planter with fertilizer and seed or livestock feeder with grains from your gravity flow wagon quickly and easily with the patented Hydra Fold Auger. The self-centering, free swinging design won't bind because it has no gears, belts, or chains to cause trouble. It saves your back while it speeds the jobs you want done in a hurry.
Adaptable to single or double action hydraulic systems, the complete unit can be installed the first time on almost any make gravity flow wagon in less than an hour. Because it is mounted on just two pins, it is on or off in two minutes or less.
Easy to Operate
Finger-tip controls at both the discharge end and the tractor, plus variable delivery speed makes it easy for the operator to fill grain drill or planter boxes without waste or spillage. The hopper is practically self-emptying and the auger (available in 11, 14 or 16 foot lengths) swings 180 degrees to allow discharging from ground level up to 13 feet. The auger folds out of the way when not in use for easy transport.
Filling Planter with Fertilizer
Use Model HF-11 for 4 row wide or 6 row narrow; Model HF-14 for IHC air planters. Auger does not have to be cleaned out between fillings.
Filling Drill With Seed
Auger discharge height is adjustable, and swings easily to fill drill hopper. Flow is controlled at the discharge end of the auger. Note Hydra-Fold's patented way of mounting auger below the hopper; no spilling and no waste. This results in nearly complete clean-out of the hopper. It also elminates the churning action of an auger operating in an open container.
Filling Planter With Seed
HF-14 Auger filling seed hoppers on 12 row IHC planter with soybeans. Wagon does not have to be moved to fill both hoppers.
Diameter .....6' OD
Length ... HF-611 is 10' 11'
HF-614 is 13' 11'
HF-616 is 15' 11'
Tubing.... 16 gauge welded steel
Flighting ...10 guage, helical wound standard pitch
Motor...1 inch shaft hydraulic motor
- HF-611 and HF-614 requires 8 gal/min and 1000 PSI hydraulic system
- HF-616 requires 8 gal/min and 1400 PSI hydraulic system
Hopper ...34' - 42' adjustable welded steel
Attachment ....two hair pins
Operating...Self Centering Design
Height ....ground level to 13 feet
Operating Radius ....180 degrees
Speed .... infinite; control at discharge end
Positioning....cable & winch
Hyd. Hose...requires two hoses (not included)
Output...10 bu. seed/minute 500 to 700#/min fertilizer
Transport...front or rear
- 180 Brackets for Demco Wagons
- 52', 62' and 66' Double Door Hoppers
8' Auger Designed for Grain
Unloading Into Wagon:
Mount the 8' auger on your gravity box and covert it into a grain cart during harvest. Hoppers are available to fit most all makes of gravity boxes on the market.
Transferring Into Trucks
Big 8' auger handles up to 40 bushels dry corn per minute. Wet grain will be slightly less, depending on moisture. Ideal for moving grain from combine to trucks during harvest or loading grain from storage bin to trucks for delivery to market.
If the farmer wants to handle grain, seed, and fertilizer, the 8' unit may be used by restricting the intake opening when handling seed or fertilizer.