Model GMT050 - Grapple Saw
From GMT Products
Felling, chipping and/or transporting of trees with only one single machine. You wish to perform your sawing activities without extra manpower? And at the same time be productive, fast and efficient? You are looking for a professional, versatile product. Gierkink Machine Techniek can supply this equipment: the grapple saw GMT050.
- Weight 380 kg/840 lbs
- Max. diameter saw cut 50 cm/20 '
- Max. load 2500 kg/5500 lbs
The grapple saw GMT050
The grapple saw combines various advantages and functions in one machine. It enables you to fell, shorten, chip and transport trees, with the highest possible control comfort. This grapple with saw can be mounted on any crane with grapple. A simple, efficient system for our customers, without additional hoses. And safe because climbing trees is no longer necessary.
Felling trees, chipping and/or transport
Felling trees, bringing down the parts, collecting, hauling and chipping, all in one pass with the grapple saw GMT050. Thus you will save labour force. Because of its low maintenance construction the grapple saw GMT050 is an economically sound long-term investment. Quality that pays off immediately.
The advantages of the grapple saw GMT050
Because of its low weight, its large felling diameter and its excellent quality the GMT050 is fully deployable in the collection of biomass and energy wood. It is very cost effective and saves a lot of your precious time. Every GMT050 is thoroughly tested and checked before is is delivered.
- Enlarge the employability of your machine
- Fast cycle of operation, so usable near roads, railroads and in (public)parks
- Save up to 60% of man-hours
- Thanks to the saw cut there is no damage on the stem or tree trunk
- Remove or prune/shear/cut trees safely and efficiently
- Grapple open capacity 1220 mm
- Weight 385 kg
- Max. load 1500 kg/3300 lbs
- Recommended pump capacity 60/100 ltr
- Operating pressure 180/250 bar
- Length saw bar 640 mm
- Chain type 2 mm 404” 74 links
- Maximum diameter saw cut 500 mm
- Volume oil reservoir 2 ltr
- Saw motor 10 cc