Hammer Blower
The Hammer Blower is a hammermill and blower, all in one unit. Combining a powerful, hammermill with a high capacity, blower fan, Art’s Way’s Hammer Blower is a versatile machine that can grind high moisture shelled or ear corn and blow the mixture up into a silo or bunk too. This machine can grind dry corn through a 1/8-inch screen directly into a truck with virtually no dust. Providing further flexibility, the Hammer Blower has a vent adjustment that allows changing between silo feeding and bagging. Processing shell or ear corn improves kernel digestibility, especially when kernels are mature. Processors also break the cobs to increase cob consumption. The crushing process also improves silo compaction, allowing for increased capacity. Combining a mill with a blower is an ideal setup because it can process the corn before blowing it into silos or bags.
-
Most popular related searches
High Power Capacity
High Power Capacity
The Hammer Blower has a capacity of 1-ton per minute. It has capability to reach the tallest silos. Powered by a tractor PTO, both the hammermill and the blower operate at 1000 rpm and require a minimum of 80 hp.
The Hammer Blower’s applications are changed without tools. The machine is rugged and easy to maintain.
Features
Versatile vent for silo or bagging operations
Corn goes into the hopper in the back and then up an auger before dropping into the powerful hammermill. From there, the ground corn is sent through the 42-inch blower fan where the vent can adjusted to either go up a tube to the silo or to a bagging operation.
Hammermill
Heat treated hammers
96 heat treated hammers reduce maintenance costs and extend the life of the Hammermill. Hammers can be rotated four times for longer cutting life.
Easy cleaning and maintenance for longer life
26-inch hammermill (shown with shield removed) provides easy accessibility for cleaning, maintenance and changing of screens.
A magnet keeps out tramp metal to ensure longer life of hammers and screens.
Varied particle size
The range of screen sizes (1/8 up to 2 inch) available produce your individual feed requirements and are easily installed.
PTO drive
1000 RPM Hammermill and Blower
Requires minimum 140 PTO HP tractor.
1 3/8 in. 21 spline
1 3/4 in. 20 spline (opt)
Blower Fan
High power blower
Blower outlet easily removable for quick inspection and maintenance, without loosening housing band.
42 inch diameter impeller housing with heavy eight-paddle fan and rotating back plate that provides non-stop filling and virtually eliminates plugging. Paddles made from 40/50 carbon steel resist wear and corrosion.
Sharpened adjustable shear bar keeps paddle tips clean. Prevents carry-over and power loss.
Reversible housing band.
Power paddle design
Engineering tests show that 35 degree paddle angle generates a greater air stream, moving more material with less power.
Customer reviews
No reviews were found for Hammer Blower. Be the first to review!