Haybuster - Model CMF-430 - Vertical Mixer
From Vertical Mixers / Cutter-Mixer-Feeder
At Haybuster, we put 40 years of hay and feed processing experience into our Cutter-Mixer-Feeders (CMF’s). Our engineers, with farm and cattle backgrounds designed them with input from dairy and beef growers throughout North America. Haybuster products are built with attention to durability, versatility and reliability. Compare our equipment to our competition and you will see the difference. Our CMF's are built heavier and stronger for long service life.
-
Most popular related searches
Features
MIXING CAPACITY
The CMF-430 has a 430 Cu. extension. Ft. mixing capacity with the standard
ADJUSTABLE VERTICAL KNIVES
Adjustable vertical knives for more aggressive cutting
OBSERVATION LADDER
Ladder mounted on front of machine which allows for viewing of mixed ration while machine is stopped.
CONVEYOR OPTIONS
The unloading door is 42' high and can be on the left or right side of the machine. Conveyor options are a 3' or 5' extension which gives a feeding height range of between 36' and 58'. Magnets are available for the convevor extension.
SINGLE AUGER
88' Heavy-Duty Single Auger with up to 7 self-sharpening serrated knives driven by an HD USA gearbox that is covered by a two-year warrantv.
DIGI-STAR FOUR POINT SCALE The CMF-430
is equipped with a Digi-Star 4 pt. scale and monitor. Various monitor options are available. The Digi-Star system is powered by a standard onboard 12-volt battery. Digi-Star feed rationing programs are also available.
FREE MOTION CLUTCHES ON DRIVELINE
Free motion clutches on driveline protect the heavy-duty gear boxes Gearboxes come with a 2-year warranty. The optional 2-speed gear box is used for loaded start-ups and heavy rations.
4 POINT SCALE
4 point scale for accurate weighing, during loading and feeding. with reduced scale bounce
HEAVY DUTY RIGID AXLES
Rigid Heavy Duty Axles on each side with 2 14L-16.1 12 ply tires.
TAPERED BOIL RING
The Tapered Boil Ring is standard equipment on the CMF-430. It prevents product from boiling over the sides during the cutting and
mixing processes.
OPTIONAL MAGNETS
Magnets on the discharge chutes remove metal, such as bale wire, from feed providing the highest quality feed available.
CV PTO OR OPTIONAL 2-SPEED GEAR BOX
The CMF-430 comes equipped with either a Heavy Duty Constant Velocity 540 rpm PTO or an optional 2-Speed Gear Box. The 2-Speed Gear Box is used for loaded start-ups and heavy rations.
Specification
WEIGHT
Total 8,120 lbs (3683.2 kgs)
Tongue Weight 960 lbs (435.4 kgs)
TRANSPORT DIMENSIONS
Width 10 ft. 8 in. (3.25 m)
Length 16 ft. 6 in. (5.03 m)
Height 9 ft. 8 in. (2.95 m)
WORKING DIMENSIONS
Width 8 ft. 7-3/16 in. (2.64 m)
Loading Height With Extensions 9 ft. 8 in. (2.95 m)
CHASSIS FEATURES
Towing Arrangement Clevis Type Hitch/Pintle
Jack Capacity 7,000 lbs. (3,175.2 kg)
Jack Travel 10 in. (25.4 cm)
Tires (2) 14L-16.1-12 ply
Wheels (2) 8 hole
Axle Rigid
Bearings Tapered Roller
Extensions 12 inch rubber (standard)
CAPACITIES
Mixing capacity 436 cu. Ft (12.35 cu. m)
Gross Weight Capacity 19,100 lbs (8,663.6 kg)
Tare Weight - TMR 10,750 lbs (4,876.1 kg)
AUGERS
Number 1
Diameter 88 in. (223.52 cm)
Flighting Thickness 5/8 in. (1.59 cm)
Number / Thickness Knives 7-5/16 in. (0.3125 cm)
Self-Sharpening
DRIVELINE AND GEAR BOXES
Drive Line 1 3/8 in. (3.49 cm)
Constant Velocity 540 rpm PTO Shaft, Optional 2-Speed Gearbox
Protected Clutch (1) Free motion automatic clutches
Gearboxes (1) HD gearbox with 2 year warranty
UNLOADING DOOR
Door 43 in. (109.22 cm) wide x 36 in. (91.44 cm) long
Discharge Height 30 in. (76.2 cm)
Discharge Options Left or Right
MISCELANEOUS
Door Opening 24 in. (60.96 cm) x 42 in. (106.68 cm)
Floor Thickness 5/8 in. (1.59 cm)
Side Wall Thickness 1/4 in. (0.635 cm)
Scale Digi-Star 4 point scale with EZ 2000 monitor
Observation Windows 2
REQUIREMENT FOR OPERATION
PTO Horsepower Required 80 HP Minimum
PTO Type 540 rpm, 1-3/8 in. Dia. With 6 Spline
Min. Tractor Hydraulic Output 8 gpm at 1500 psi (46 lpm X 10,345 kPa)
SMV Sign and Road Lights Standard Equipment
Electrical 12 VDC (battery included)
Options
Magnets on chutes/spouts
Discharge magnets on the chutes/spouts remove ferrous metal, such as bale wire, from feed, providing the highest quality feed available.
Left or right door opening
Optional left or right door opening with discharge conveyor options of 3’ or 5’ provide the ultimate flexibility for feeding applications. The 3’ conveyor has a feed height ranging from 36” to 44”. The 5’ conveyor has a feed range from 45” to 58”.
2 speed gear box
The 2 speed gear box is used for heavy starts after transporting heavy rations to protect the tractor PTO and mixers drive train.
Digi-Star Scale
Choose from any Digi-Star scale indicator (see Digi-Star link below) Also available are optional Digi-Star Feed Management Programs.
Customer reviews
No reviews were found for Haybuster - Model CMF-430 - Vertical Mixer. Be the first to review!