Haybuster - Model CMF-710 - Vertical Mixer
At Haybuster, we put 40 years of hay and feed processing experience into our Cutter-Mixer-Feeders (CMF’s). Our engineers, with farm and cattle backgrounds designed them with input from dairy and beef growers throughout North America. Haybuster products are built with attention to durability, versatility, and reliability. Compare our equipment to our competition and you will see the difference. Our CMF’s are built heavier and stronger for long service life.
MIXING CAPACITY TTie CMF-710 has a 710 cu. ft. mixing capacity.
ADJUSTABLE VERTICAL KNIVES
Adjustable vertical knives for more ag gressive cutting.
The CMF-710 has observation windows on the right and left sides of the machine.
LARGE 30 INCH BY 40 INCH UNLOADING DOOR
Large 30 inch by 40 inch unloading door for fast even unloading and cleaning.
76' HEAVY DUTY TWIN AUGERS W/7 KNIVES PER AUGER
Heavy duty 76 inch twin screw augers, with self sharpening serrated knives, driven by 2 HD USA gearboxes that are covered by a two year warranty.
DIGI-STAR 4PT SCALE WITH CHOICE OF OPTIONAL DIGI-STAR MONITORS A CMF-710 equipped with the standard Digi-Star4pt. scale and EZ 3500 V monitor. All other Digi-Star monitors and scale heads are available. The Digi-Star system is powered by a standard onboard 12 volt battery. Digi-Star feeding programs are also available. See Diai-Star link below for more information.
FREE MOTION CLUTCHES ON DRIVELINE
Free motion clutches on driveline protect the heavy duty gearboxs. Gearboxes come with a two-year warranty. The optional two speed aearbox is used for loaded startuos and heaw rations.
4 POINT SCALE 4 point scale for accurate weighing, during loading and feeding. with reduced scale bounce
OSCIALLATING HEAVY DUTY AXLES
Oscillating Heavy Duty Axles with 4) 315/80 R 22.5 20 ply rated tires provide even weight distribution on uneven and frozen ground.
HEAVY DUTY FRAME
The CMF-710 is built with a Heavy Duty 6' frame for strength and longevity. X9' X 1/4' steel tube
OPTIONAL MAGNETS ON CHUTES
Discharge magnets on the discharge chutes removes metal, such as bale wire, from feed, providing the highest quality feed available
Qotional DoalecConvevor Available.
CV PTO OR OPTIONAL 2-SPEED GEAR BOX The CMF-710
comes equipped with either a Heavy Duty Constant velocity PTO or an optional 2-Speed Gear box. The two speed gearbox is used for loaded startups and heavy rations.
Total 13,660 lbs. (6,196.07 kg)
Tongue Weight 1,180 lbs. (535.24 kg)
TRANSPORT DIMENSIONS (Fully raised conveyor)
Width 10' 1-1/2' (3.086 m)
Length 22' 2-11/16' (6.774 m)
Height 10' 2-3/4' (3.118 m)
Width 11’ 11” (3.65 m) w/ conveyor at 45 degree angle
Width 9' 2-1/2' (2.807 m)
Loading Height With Extensions 10' 2-3/4' (3.118 m)
Towing Arrangement Clevis Type Hitch
Jack Capacity 7,000 lbs (3175.2 kg)
Jack Travel 10 in. (25.4 cm)
Tires (4) 14 L-16.1-12 ply
Wheels (4) 8 Hole
Bearings Tapered Roller
Extensions 12' Rubber
Mixing capacity 710 cu. ft. (20.10 cu. m)
Gross Weight Capacity 32,000 lbs (14,514.96 kg)
Tare Weight - TMR 18,340 lbs (8,314.88 kg)
Diameter 76' (193 cm)
Flighting Thickness 5/8 in. (1.59 cm)
Number / Thickness Knives 14-5/16' (0.794 cm)
DRIVELINE AND GEAR BOXES
Drive Line Constant velocity, 1000 rpm PTO, available in 1-3/4” (4.45 cm) or 1-3/8” (3.49 cm)
Clutch (2) Free motion automatic clutches; protected
Gearboxes 2- RR USA 100HP gearboxes, 2 year warranty pending
Type 36 in. (91.44 cm) Chain With Hydraulic Orbital Motors
Discharge Options Left, right, dual
Dogleg Style Conveyor Optional 30” (76.2 cm)
Door Opening 30' (76.2 cm) x 40' (101.6 cm)
Floor Thickness 5/8 in. (1.58 cm)
Side Wall Thickness 1/4 in. (0.635 cm)
Scale Digi-Star 4 point scale with optional monitor
Observation Windows 2
REQUIREMENT FOR OPERATION - TRACTOR
PTO Horsepower Required 125 HP minimum
PTO Type 1000 RPM, 1-3/8” Dia. with 21 Spline Minimum
PTO Optional 1-3/4” Dia. with 20 Spline
Min. Tractor Hydraulic Output 8 gpm at 1500 psi (46 lpm X 10,345 kPa)
Magnets on discharge spouts
Left, Right or Dual Discharge Conveyors
Rear Discharge Door
2 Speed gear boxes
Dogleg Style Conveyor
Magnets on discharge spouts
Magnets on the spouts remove ferrous metal, such as bale wire, from feed, providing the highest quality feed available.
Left, right, or dual discharge conveyors
Optional left, right, or dual discharge conveyors provide the ultimate flexibility for feeding applications.
Dogleg Style Conveyor Optional
Rear discharge door
The optional rear discharge door provides an additional means of discharging feed.
2 speed gear box
The 2 speed gear box is used for heavy starts after transporting heavy rations to protect the tractor PTO and mixers drive train.
Choose from any Digi-Star scale indicator (see Digi-Star link below) Also available are optional Digi-Star Feed Management Programs.