Model Horizontal Type - Automatic Washing (Capacity 2000 lt- 10000lt)
From Milk Elimination
Kromel Cooling Tanks ; Milking refrigating time from 35°C to 4°C under 3 hours. Cooling performance Class 2/A/II. Special calibrated manuel scale with %003-4 sensitive rate.1.walled 2mm and 1 mm walled accuplated Ep type heat transfer plate.Isolated walled from AISI 304 S.S.Tank body accuplated on whole chassis.Product Outlet DN 50 Butterfly valve.
- Designed according to 0 liquid discharging system
- Insulation material; high density polyurethane foam without CFC and izolation thickness 60 mm
- Ø 400-500 menhole cover stainless steel and Ø100 mm product inlet
- 1 pce 0,34 Hp d/d gearbox and agitator.Agitator has designed according to milk structure protection (in 2000lt-10000 lt Tank, 2 agitator are existed)
- 1 pces stainless steel ladder
- Capacities; 2000lt-10000lt
- Ø76 air hole
- Welding;Argon Tig welding system applied
- Cooling evaparator (rolbont)has tested against 40 bar test pressure.
Cooling compressor are accuplated on chassis.Min.gas charge ability.A404 gas cooling.Cooling possibility in min.milk quantities.
- Milking refrigating time from 35°C to 4°C under 2,5 hours
- Cooling Performance Class 2/A II
- Drier, sight glass, expantion valve,selenoid valve,liquid protector and valves etc.which belongs to the compressor ere existed.
Electronic Control Pannel
Electrical Control system are working by electronic KROMEL cards and it's accuplated stainless steel frame board.Working principle of Tank, Milk Temperature,Electronic Milk scale,Washing system,and menus are controlled by control panel.
- When become a failure on electrical system, cooling system can past into the manuel system.
- Extra electro -mecanic safety system which is adjusted to 1,5 and 2°C is existed in order to prevent of freezng of milk.
- Any breakdown of system,failure message is existed.
- Passibity to check of failures,washing temperatures ,electrical defects milk temperatures previous last 20 days.
- To prevent of shock voltage on multiple system compressor ,system has been start up by stage.
- Phase protection regulator in order to prevent of voltage increasing and decreasing, mixing of phase
- Internet outlets on the electronic control panel
- Washing ability between 3 and 5 times.
- Water consumption saving.
- To contact whole surface of interiour tha thank by menas of the special CIP bowls.
- Start up the washing programme with one button (easy washing).
- Saving of detegent using.
- Optional detergent dosing pump.
Digital Level Indicator
- %3-4 failure rate sensitivity.
- Possibilty of control milk quantity on the panel.
- Possibilty of check from mm or it parameteres.