- Model 2710 - Wheel Trencher

From

0

The new Hydramaxx 2710 bucket wheel trencher from Port Industries provides a safer, more comfortable and productive environment for the operator.   The ROPS certified (awaiting final approval) cab assures the highest degree of operator safety.  The cab lowers for easy access – just one step off the ground – and rises 48” for maximum visibility.  The sealed design of the cab with factory heat and A/C provide a clean and quiet environment.  Ergonomic processor based controls positioned on the arm rests, allow access to more systems information, and customized control options to increase performance and productivity.

General

Total Overall Weight: 49,000 LB
Height: 11’
Width: 11’ 3”
Length: 42’
Travel Speeds: TRAVEL SPEEDS
1st Low / High: 0 - 2 MPH / 0 - 4 MPH
2nd Low / High: 0 - 7.5 MPH / 0 - 15 MPH

Tractor Unit

Ground Clearance: TRANSMISSION - 27” UPRIGHTS - 23”
Wheel Base: 12’ 6”
Front Axle: OUTBOARD PLANETARY WITH LIMITED SLIP
Rear Axle: INBOARD PLANETARY WITH HYD. DIFF LOCK
Tires - Standard: 30.5 x 32L - 14 PLY SPADE GRIP (R2) TREAD
Track Width - Center Line Of Tires: 92”
Transmission: FOUR SPEED WITH TWO SPEED SHIFT ON THE GO
Auto / Manual Leveling: 8° RIGHT AND 8° LEFT
Brakes: INDEPENDENT INBOARD REAR AXEL - HYD. APPLIED
Elevating Cab (Standard): HEAT AND AIR CONDITIONING (standard)
Intelligent Processor Based Controls: AUTO LOAD CONTROL (standard)
System Monitoring: ON BOARD AIR (standard)

Engine

Make & Model: DEERE 13.5 / IN LINE 6 CYL. / TIER III COMPLIANT
Gross Horsepower: 425 HP @ 2100 RPM WITH POWER BULGE (450 HP)
Displacement: 13.5 LITER / 824 CU IN
Fuel Tank Capacity: 225 GALLON
Electrical System: 24 VOLT
Batteries - (2) 8d-Mhd: 1400 CCA RC 450
Automatic Ether Cold Starting Aid (Standard): OPTIONAL BLOCK HEATER KIT(S)

Digging Wheel

Digging Wheel Diameter: 97” INSIDE / 126” OUTSIDE
Digging Wheel Construction: 3/4” x 6” RIMS WITH 1/2” x 3” ATTACHING RING
Digging Depth Range: 0 - 7’ 3”
Digging Width Range: 18 - 40” (OPTIONAL 48”)
Standard Cutting Arrangement: 16” BUCKETS WITH CENTER CUTTERS (22” CUT)
Sloper Kit: OPTIONAL
Hydraulic Upright & Digging Wheel Pivot: 14.5°
Roller Slides: ROLLER (12) - 3”
Ground Clearance For Transport: UPRIGHTS - 17” BUCKETS - 36”
Pipe Box: 3 - 12” TILE LAYER, HYDRAULIC BEDDERS

Conveyor

LENGTH - 8’ (STANDARD) 10’ (OPTIONAL)
WIDTH - 36”
LEFT OR RIGHT DISCHARGE W/ 36” SHIFT

Hydraulic System

120 GALLON CAPACITY
TRACTOR HYDRAULIC FLUID
FILTRATION 25 MICRON RETURNS / 5 MICRON PRESSURE

Customer reviews

No reviews were found for Hydramaxx - Model 2710 - Wheel Trencher. Be the first to review!