Lechler - Model ID3 - Air-Injector Flat Spray Nozzles
From Agriculture Products- Nozzles for Broadcast Spraying
Extremely low-drift, air-injector flat spray nozzle for professional use.
Features
- Nozzle size : 01 – 10
- Spray angle : 120°
- Material : POM, Ceramic
- Pressure range : ID-01 to -015: 3 – 4 – 8 bar, ID-02 to -10: 2 – 4 – 8 bar, UAN: 2 – 4 bar
- Recommended filters : 80 M 01, 60 M 02 – 04, 25 M 05 – 10
- Droplet size : Ultra coarse – medium
- Width across flats : 10 mm
Main Benefits
- More solid design of nozzle body by filed construction
- 0.9 cm shorter in comparison to ID range
- Improved protection of nozzle tip by reinforced side walls
- Easier cleaning of nozzle body by smooth transition - Plane injector orifice
- Easy wipe away of residues and dirt
- Toolless removal and assembly of injector e.g. for cleaning purpose
- Correct alignment of injector into the nozzle body by inside catch
- Safe sealing between injector and nozzle body by o-ring - Extended pressure range from 2.0 to 8.0 bar
- Long injector design responsible for high drift stability
- Reduced fine droplet fraction also at higher pressure
- Increased work rate at higher speeds
- Even better adaption of sprayer speed and l/ha-rate without changing of nozzles
- Application in due time even under worse weather conditions
- For use at wind speeds up to 5 m/s according to good agricultural practice
- Potential of 90% drift reduction at 2.0 bar - Proved materials such as POM or ceramic available depending on application conditions
- Non sensitive towards clogging due to big cross sections
- Very good deposition structure and crop-canopy penetration ensures high biological performances
Application Areas
- Plant protection products and growth regulators
- Liquid fertilizer
- Border application can be combined with border nozzle IS 80
- Golf course
Advantages
- ?Up to 90% drift reduction depending on nozzle size, pressure and country
- ?Long injector design ensures high drift stability over a wide pressure range
- ?Timely application even under adverse weather conditions
- ?Increased workrate due to flexible use over a wide pressure range – Adaptation by changing the driving speed and l/ha rate without nozzle changes
- ?Very good deposition structure and crop penetration
Customer reviews
No reviews were found for Lechler - Model ID3 - Air-Injector Flat Spray Nozzles. Be the first to review!