IPEX Ultra-Rib - Model OD - Open Profile PVC Pipe
From Municipal - Sewer Piping Systems
Ultra-Rib’s seamless ‘Open Profile’ wall has the same stiffness as DR35, but with a more efficient use of structural material.
Products Details
- Tight joints and lower treatment costs
- Superior flow characteristics
- Stress crack resistance
IPEX Ultra-Rib is a gravity flow PVC sewer pipe with concentric reinforcing ribs that encircle the pipe to provide superior ring stiffness and performance. It is an extruded, seamless pipe made from high grade PVC compound. Its optimized profile design offers strength and reliability, as well as economy and superior flow rates.
Ultra-Rib PVC Sewer Pipe (Open profile OD)
- 8 - 24' (200 - 600 mm)
CSA B182.4 certified
- ASTM F794
- ASHTO M304
- Sanitary sewer
- Storm sewer
- Highway / culvert
Ultra-Rib PVC Sewer Fittings (Open profile OD)
- 8 - 24' (200 - 600 mm) CSA B182.4 certified
- ASTM F794
- Sanitary sewer
- Storm sewer
- Highway / culvert
Specifications
GENERAL
IPEX Ultra-Rib PVC Pipe is available in sizes 200mm, 250mm, 300mm, 375mm, 450mm, 525mm and 600mm (8' - 24').
MATERIAL
Ultra-Rib PVC Pipe shall be made of PVC compound having a cell classification of 12454B as defined in ASTM D1784.
PRODUCT
The pipe shall be extruded with a smooth interior and with solid reinforcing ribs on the exterior at right angles to the pipe. The space between any two ribs serves as a gasket race. Ultra-Rib PVC pipe and fittings shall be certified to CSA B182.4 “Profile (Ribbed) PVC Sewer Pipe and Fittings”, and shall meet the requirements of ASTM F794 “Standard Specification for Poly (Vinyl Chloride) (PVC) Ribbed Gravity Sanitary Pipe and Fittings Based on Controlled Inside Diameter”.
PIPE STIFFNESS
Pipe stiffness must be 320 kPa (46 lbs/in of sample length per inch of deflection) at 5% vertical deflection when tested according to ASTM D2412.
JOINTS
Gaskets for use with Ultra-Rib pipe are manufactured from EPDM and are designed specifically for use with Ultra-Rib pipe. This unique design is also available in Nitrile. Sealing gaskets shall meet the requirements of CSA B182.4 and ASTM F477, with the additional requirement that joints shall be able to withstand 345 kPa (50 psi) hydrostatic pressure. The joint will not leak at 10.8 psi or 25' (74 kPa) or 7.5m of head with –74 kPa (22') Hg vacuum with spigot under 5% ring deflection and joint at full axial deflection.
Customer reviews
No reviews were found for IPEX Ultra-Rib - Model OD - Open Profile PVC Pipe. Be the first to review!