James Engineering Ltd.

- Heavy Duty Mole Plough

0

The James Heavy Duty Mole plough is designed to transfer ground water to field tiles or open drains in soils where there is good clay subsoil. The mole plough forms a 60mm channel in the clay at a depth of approximately 46cm providing drainage.

  • The long heavy duty beams provide excellent planing action on undulating ground surfaces.
  • A 450mm skieth can be fitted to cut surface trash to avoid blade build-up.
  • A wear resistant shin plate is fitted to the blade cutting edge as standard.
  • The high tensile blade is shearbolt protected.
  • A swivelled headstock permits easy following of contours and reduces stress on tractor hydraulic arms.
  • Side springs fitted to the headstock centralise the mole plough when positioning the unit for the next run. They also cushion side-swing when being transported on un-even ground.
  • A hydraulic ram can also be fitted if required in a dairying situation where open drains are protected by a single wire electric fence. By retracting the ram the plough can be reversed under the wire to access the drain.
  • The hydraulic ram can be used as a top-link ram if desired.
  • Extending the hydraulic ram returns the blade to working position when the plough is positioned over drain.

Customer reviews

No reviews were found for James - Heavy Duty Mole Plough. Be the first to review!