Only show results in Virginia? Ok

Agricultural Bolt equipment

  • Lifetime - Hay Wagon Feeder

    An economical way to feed your cattle in the winter and haul hay in the summer, simply bolt on a Feeder Kit for a fraction of the cost of a feeder wagon. Available on 20' and 25' models. Other lengths also available. Bolt on  Feeder Kits  allow you to convert your flat wagon  into a hay feeder wagon. The feeder sides slide in & ...

    By G. L. Nause Co., Inc. based in Loveland, OHIO (USA). from Agricultural Product line

  • Genap - Slurry Horticulture Silos

    Genap has been supplying and installing storage solutions for water and slurry for 60 years, like storing slurry in a slurry silo which is a steel silo, coated on two sides, and fitted with a plastic lining. The horticulture silo consists  of modular constructed corrugated sheets and is supplied up to a diameter of 32 metres and a ...

    By Genap B.V. based in `s-Heerenberg, NETHERLANDS. from Agriculture Product line

  • IAE - Model Vertirack - Heavy Duty Vertical Rails

    The Vertirack is a modular system allowing varying lengths of hayrack to be easily achieved using standard sections. This hayrack is manufactured with heavy duty vertical rails to withstand sustained use in cattle sheds. The unit can be configured to be a hook over type unit with a meshed back panel included, or can be configured to be a bolt to ...

    By IAE based in Stoke-on-Trent, UNITED KINGDOM. from Agricultural Product line

  • IAE - Sheep Docking Crate

    Sheep Docking Crate 1350mm long x 560mm wide x 1000mm high. Quick acting dual rear gates. Self locking yoke with 5 variable width settings from 50mm to 130mm maximum. Yoke can be locked open to allow clear passage. Wheels and handles are available at an extra cost. Drilled lugs allow the units to be incorporated into the heavy duty race system if ...

    By IAE based in Stoke-on-Trent, UNITED KINGDOM. from Agricultural Product line

  • Model 7000 - Blade Cultivator

    Nobleford, Alberta is the birthplace of the Blade Cultivator concept, to conserve moisture and leave stubble standing. The NEW NOBLE Blade Cultivator has been built since the early 1940's and the mechanical trip model is the latest technological improvement making the Blade Cultivator available to areas where rocks did not allow the use of Shear ...

    By Agri-Tech Manufacturing Ltd based in Nobleford, ALBERTA (CANADA). from Agricultural Product line

  • FIBROTEX - Portable Cattle Handling System

    IAE Rotex  Portable Cattle Handling System is an easy and superbly convenient way of handling cattle. Semi-circular crowding/forcing areas encompass the most modern ideas and theories in animal welfare and operative safety. The Rotex system is extremely portable, quickly assembled, and safe whilst on the move due to the bespoke transport ...

    By IAE based in Stoke-on-Trent, UNITED KINGDOM. from Agricultural Product line

  • Model 1235 - Conveyor

    Size: 35' X 10' tube with 12' belt. Thicker 12-gauge tube for longer wear life. Finest quality 2-ply all rubber conveyor belt for easier cold weather starts and longer wear life. Belt adjustment at top avoids standing water or fertilizer residue and gets hopper lower to ground. Powder coat painted for more durable long lasting finish. Fully ...

    By Sheyenne Tooling & Manufacturing based in Cooperstown, NORTH DAKOTA (USA). from Agriculture Product line

  • Stewart Steel - Model 60 Series - Axceller

    Our Axceller Kit is built for Case combine rotors on all models from the 1440 to the 2388. The Axceller can be installed in the field, requiring no welding or cutting. -Unit comes balanced with only minimal static rotor rebalancing after installation is complete. -Impeller blades are ½” thick material and front hub is ...

    By Stewart Steel based in Weyburn, SASKATCHEWAN (CANADA). from Agriculture Product line

  • IAE - Model Classic - Calf Creep Feeder

    The IAE classic calf creep feeder brings together the best elements of our previous calf creep feeder designs and enhances the product with new features and design alterations. The hopper, intricately folded from heavy gauge sheet using our state of the art folding and punching equipment, forms an integral part of the structure of the creep. ...

    By IAE based in Stoke-on-Trent, UNITED KINGDOM. from Agricultural Product line

  • Sealed Storage Tank

    When moist grain is stored in a sealed (air tight) silo, the grain converts the oxygen in the silo to carbon dioxide (CO2) and alcohol - i.e. the grain 'commits suicide'. The grain looses its germination ability, and there are no risks of vermins - as they cannot live in the oxygen-free surroundings. The process preserves and fermentates the grain ...

    By Assentoft Silo A/S based in Randers SØ, DENMARK. from Agriculture Product line

  • 2-Way Polypropylene Ball Bolted Valve

    Fibreglass reinforced polypropylene body for greater strength and chemical resistance. Teflon seats for smooth operation and efficient sealing. EPDM gaskets for treatments with fertilizers and chemicals. Viton® available on request. Max operating pressure: 16 barBolts in STAINLESS STEEL. Balls in Polypropylene / Stainless Steel.

    By Tecomec S.r.l. based in Reggio Emilia (RE), ITALY. from Agricultural Spray Products - Ball Valves Product line

  • FAO - Indoor Grain Silos

    Construction in fully galvanized corrugated steel plate, assembled by means of galvanized bolting and reinforced by outside stiffeners (depending of the height).

    By FAO SN based in Vitré, FRANCE. from Agricultural/Storing Product line

  • Diversified - Fertilizer and Lime Spreaders

    10' T-304 Stainless Steel Hopper (flared). 24' stainless conveyor chain, with half-rate sprocket. 30' clearance under trailer. Steel roller chain. All bolts stainless steel. Hydraulic driven spinners. Dishes, blades, and bolts, stainless steel. Heavy 2' x 6' rectangular tube chassis. 10 bolt, 12000 pound hub and spindle assemblies. 24,000 pound ...

    By Diversified Fabricators Inc. (DFI) based in Griffin, GEORGIA (US) (USA). from Agricultural Equipment Product line

  • Vetter - Bolt-on Forks with Holes

    Bolt-on forks are often used on large forklift trucks and attachments, e.g. multi-pallet handlers for the beverage industry. Holes in the fork shank allow them to be bolted onto the fork carriage. Due to the holes and the resulting notch effect, the load-bearing capacity is lower than that of standard forks of comparable cross-section. We thus ...

    By Vetter Umformtechnik GmbH based in Burbach, GERMANY. from Suspensions Fork Product line

  • Width Bolt Adjustable Plough

    A first in Turkey and the world, it was designed and manufactured to work in 360 degrees when there is any kind strain. Due to the special spring coils placed into all the socks it can be freed from any obstacle, it doesn’t strain the tractor and it is fuel efficient. Its automatic mechanism is made durable with the heating process technique ...

  • Electric Folding Booms

    The electric folding boom is spring-loaded with 12 vdc actuators.  It can be easily mounted with 'U' bolts and is available in 2 different sizes: 10ft and 18ft.  The boom structure is made of galvanized square steel.  The kit includes the 12 volt actuators and the switchbox (open/close) to operate the boom.   All our booms ...

    By Salvarani North America based in Montreal, QUEBEC (CANADA). from Agriculture Products Product line

  • OEM - Standard T-Bolt Hose Clamps for Agricultural Machinery and Irrigation Systems

    Oem T-bolt Hose Clamps are working according to the screw-nut principle and are applied at high pressure points. They are preferred due to their mounting practicability and sizes. They can be use on same places as the heavy duty hose clamps are used.

    By OEM Hose Clamps Company based in Umraniye, TURKEY.

  • OEM - Spring T-Bolt Hose Clamps for Agricultural Machinery and Irrigation Systems

    Oem Spring and Heavy Duty Spring T-bolt Hose Clamps reduce the vibration rate on hard connections due to the spring; the changes on the hose size are excellently absorbed; and they are resistant to enormous pressure and temperature changes.

    By OEM Hose Clamps Company based in Umraniye, TURKEY.

  • OEM - Narrow T-Bolt Hose Clamps (14mm) for Agricultural Machinery and Irrigation Systems

    Oem Narrow T-Bolt Hose Clamps are preferred due to their compatibility with lower pressure points than the Standard T-Bolt Clamps and for economic aspects. This product is characterized in that it is easily mountable at small usage areas.

    By OEM Hose Clamps Company based in Umraniye, TURKEY.

  • Attach-Matic - Model A-RS78 - Solid Receiving

    Solid receiver with 7/8 bolt. Only to be used on flat ground. Compatible with C78 and F78 attachments. For silage boxes and four-wheel platform (not to be installed on hay cars). Weight: 26 lbs. Dimension: 13' x 14' x 11'.

    By Attach-Matic based in Victoriaville, QUEBEC (CANADA). from Agricultural Products Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you