agro-electronics Equipment in Thailand

  • Premium

    Model EBU250 - Electronic Bottom-Up Filling System

    When filling foaming products in high volumes, it is often necessary to move the filling nozzle to the ­bottom of the bottle and raise the nozzle at the same speed as the product level rises during the fill. This will give less turbulence in the liquid during filling, so foaming is reduced significantly.

    By Watson-Marlow Fluid Technology Group Office in Bangkok, THAILAND. from Tabletop Filling Units Product line

  • Electronic Logging Device (ELD)

    The Federal Motor Carrier Safety Administration (FMCSA) has announced the final Hours of Service (HOS) rule that will require commercial motor vehicle drivers to track their Record of Duty Status (RODS) electronically, using compliant Electronic Logging Devices (ELD) versus paper logbooks. Regardless of whether your driver already log their Hours ...

    By MiX Telematics Office in Bangkok, THAILAND.

  • TE525WS-L Texas Electronics 8

    The TE525-series tipping bucket rain gages are manufactured by Texas Electronics. The TE525WS measures in 0.01 inch increments. The gage funnels precipitation into a bucket mechanism that tips when filled to a calibrated level. A magnet attached to the tipping mechanism actuates a switch as the bucket tips. The momentary switch closure is counted ...

    By Campbell Scientific, Inc. Office in Bangkok, THAILAND. from Sensors Product line

  • TE525-L Texas Electronics 6

    The TE525 tipping bucket rain gage is manufactured by Texas Electronics. The TE525 measures in 0.01 inch increments. Precipitation is funneled into a bucket mechanism that tips when filled to a calibrated level. A magnet attached to the tipping mechanism actuates a switch as the bucket tips. The momentary switch closure is counted by the ...

    By Campbell Scientific, Inc. Office in Bangkok, THAILAND. from Sensors Product line

  • TE525MM-L Texas Electronics 9.6

    The TE525-series tipping bucket rain gages are manufactured by Texas Electronics. The TE525MM measures in 0.1 mm increments. The gage funnels precipitation into a bucket mechanism that tips when filled to a calibrated level. A magnet attached to the tipping mechanism actuates a switch as the bucket tips. The momentary switch closure is counted by ...

    By Campbell Scientific, Inc. Office in Bangkok, THAILAND. from Sensors Product line

  • Claas PADDY PANTHER - Model 26 - Transplanters

    PADDY PANTHER 26 is the answer to all of these challenges involved in rice farming in India. Specifically, the labor shortage problem can be solved with the concept of Custom Hiring Centers or Agro Service Centers in which one individual person or organization keeps the machine and does transplanting for small and medium scale farmers on pre ...

    By CLAAS Group Office in Klongton-Nua, Khet Watana, THAILAND. from Transplanter Product line

  • SWAN - Model AMU Rescon - Electronic Transmitter & Controller

    Electronic transmitter / controller for the measurement of the specific resistivity or specific conductivity in high purity water.

    By SWAN Analytische Instrumente AG Distributor in Bangkok, THAILAND. from Transmitters Product line

  • SWAN - Model AMI Pharmacon - Electronic Transmitter & Controller

    Designed for pharmaceutical applications with 2 signal outputs and 2 contact relays. The USP alert can be selected as a percentage ratio.

    By SWAN Analytische Instrumente AG Distributor in Bangkok, THAILAND. from Transmitters Product line

  • dol-sensors a/s - Model Differential pressure sensor - DOL 18

    dol-sensors' electronic DOL 18 sensor is used for very precise measurement of negative pressure. The DOL 18 is used primarily for measuring negative pressure in livestock houses and to trigger an alarm if the pressure is too low or too high, but it can also be used in other environments where there is a need for measurement of negative pressure.

    By dol-sensors a/s Office in Bangkok, THAILAND. from CLIMATE sensors Product line

  • dol-sensors a/s - Model Fully electric temperature sensor - DOL 15

    The electronics of the sensor are embedded in special plastic and it is well suited to livestock house environments that require a particularly sturdy design. The DOL 15 has a built-in voltage amplifier (0.1 vrc) enabling direct connection to a control unit. A detachable cap protects the sensor element, which is coated with a corrosion-resistant ...

    By dol-sensors a/s Office in Bangkok, THAILAND. from CLIMATE sensors Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you