Only show results available in Virginia? Ok

Animal Feeder equipment

  • Snacker - Animal Feeder

    Fully galvanized chassis. Injection moulded hopper made from MDPE (medium density polyethylene). Land drive. Feed delivery adjustable; one drop every five feet in three different quantities by adjusting the plate in the drum. Sprung loaded chute handle. 22 x 11 x 8 wheels and tyres.

    By CLH Trailers Ltd. based in St. Clears, UNITED KINGDOM. from Snacker Animal Feeder Product line

  • Sprintomat - Animal Feeders

    The Sprintomat is the new generation of wet feeder where feed is dispensed together with water at a variable ratio. New sensor technology ensures optimum feeding quantities by maintaining freshness and minimising feed wastage.

    By Medi Nova based in Reggio Emilia, ITALY. from Feeders, Drinking Bowls and Dosing Pumps Product line

  • Model 32L - Animal Feeder Corner

    Length mm approx: 710. Width mm approx: 420. Height mm approx : 340. Volume Litres approx: 32. RPL Code: 5023. Colour: Black.

    By Rotational Plastics NZ Ltd. based in Auckland, NEW ZEALAND.

  • Model FP36 - 3 Foor Feeder Panels

    These panels can be pinned around a large round or square bale. The animals can push panels in as they consume the bale or they can be manually moved in. Panels can be removed as the bale gets smaller. For 5-foot bales or smaller, 6 panels and 6 pins are required. For 6-foot bales or smaller, 7 panels and 7 pins required

    By D-S Livestock Equipment based in Frostburg, MARYLAND (USA). from Feeders Product line

  • Galvanized - Model GFB10 - 10` Galvanized Feed Bunks

    Strong, yet portable. Heavy duty galvanized steel construction. One-piece molded poly trough. Smooth, rounded corners. Square ends that allow bunks to be bolted together. Optional galvanized hay rack available. Designed for cattle. GFB10, GFB5 are designed for cattle, while GUB5 is lower and ideal for smaller animals. HFB10, HFB5, designed for ...

    By Behlen Manufacturing Co. based in Columbus, NEBRASKA (USA). from Feeders Product line

  • Green Chop Hay Feeders

    Designed to feed silage, green chop, large round or square bales The 3/4' exterior plywood is 4ft. high and is easy to remove for feeding large round bales. The 'V' in center promotes feed-down within the reach of the animals. Equipped with a telescoping tongue and 11 L15 8-ply tires and tubes. Trough height is 24'.

    By Weldy Enterprises based in Wakarusa, INDIANA (USA). from Feeders Product line

  • Osborne - Pivot Feeder

    Maximize sow intake without wasting feed with an all new Osborne ad-libitum pig feeder! Revolutionary and economical, the Osborne Pivot Feeder is designed to save money from the start by easily retro-fitting it to existing bowls. Further savings can easily be achieved because animal interaction occurs at the bowl–not at the feeder. As the ...

    By Osborne Industries, Inc. based in Osborne, KANSAS (USA). from Feeders Product line

  • Osborne - Stainless Steel Rectangular Feeders

    Osborne's all new stainless steel wean-to-finish rectangular feeders are constructed with heavy 16 gauge 304 stainless steel or equivalent. Solid welded construction ensures durable, long-lasting performance, and roll-hemmed edges provide extra strength with no sharp edges. Use the simple adjustments to promote optimum feed efficiency. Multiple ...

    By Osborne Industries, Inc. based in Osborne, KANSAS (USA). from Feeders Product line

  • Bale Feeders

    All of our bale feeders are three piece construction and a full 8' in diameter. The BF-8 is a durable feeder at a great price. Its 1-5/8' dia., 16 ga. galvanized round steel tubing provides corrosion resistance and long life.  The HDF-8 is our most economical 'S-Bar' bale feeder. The 'S-Bars' help keep calves out of feeder and save hay. The ...

    By Mid America Livestock Equipment based in Cobden, ILLINOIS (USA). from Feeders Product line

  • Watering Bowls for Animal Feeding and Watering

    The usage of watering bowls allows of reducing water losses to the minimum and provides a fast adaptation of animals to watering bowls.

    By Variant Factory Ltd. based in Kharkov, UKRAINE. from Feeders and Waterers Product line

  • Sipper Tubes for Animal Feeding and Watering

    Nipple-type watering systems ensure delivery of clean potable water and are highly commercially efficient. Their principle advantage is the absence of contaminations.

    By Variant Factory Ltd. based in Kharkov, UKRAINE. from Feeders and Waterers Product line

  • Heston - Model 15 Ft - Feeders

    Here is our Heston feeder, this feeder is designed for feeding animals large bales. The bale is sat on the sloping rear and as the animals feed from the front, the bale can move forward. It features the J Bar design which reduces wastage by allowing any silage that isnt eaten to fall back in to the feeder and not on to the floor. The design bars ...

    By John Shepherd Feeders based in Shepton Mallet, UNITED KINGDOM. from Other Feeders Product line

  • TUBO - Model WSKK - Feeders

    The special features of our feeders are plastic tube capacity 80 kg. Its specially design and agitator inside prevent feed lumping. What is more tube has a cover minimizing feed pollution. You can apply 2 auger pipes for one tube. Variable water system with two nipples in each feeder. Metal precise regulation systemallows to controll feed flow. ...

    By Polnet Sp. z o.o. based in Poznań, POLAND. from Feeders for Weaners Product line

  • Equity - Feeder

    If you want to feed in parlour but don’t want the expense of investing in a costly automated system, you simply want to feed a flat rate to aid milking, enticing the cows into the parlour and giving you the ability to top mixed ration feeding when you need to, then Equity is the system you have been looking for. Equity is a simple, low cost, ...

    By Collinson PLC based in Preston, UNITED KINGDOM. from Agriculture - Feeders Product line

  • Model 1 300 L - Feeder

    DS1300N : enables the transport, the measuring, the mixing and distribution of the various loaded concentrated feed.

    By Silofarmer based in Naves, FRANCE. from Electrical Ground Feeders Product line

  • Model FF-CSW42-203 - Wet/Dry Wean to Finish Feeder

    Osborne Rectangular Feeders are constructed with heavy gauge 304 stainless steel or equivalent. Solid welded construction ensures durable, long-lasting performance, and roll-hemmed edges provide extra strength with no sharp edges. Solid divider panels with pre-drilled holes allow for splitting the feeder among sort and growing pens. Simple ...

    By Osborne Industries, Inc. based in Osborne, KANSAS (USA). from Hog Feeders- Rectangular Feeders Product line

  • Minos Agri - Vertical Mixer Feeder

    MINOS Vertical Mixer Feeder; are designed to bring various animal feed into a homogenous mixture and to distribute this mixture to the animals with its robust, strong and reliable structure and easy use. All options of vertical feed mixers of appropriate capacity for all kinds of small, medium and large scaled enterprises are available with ...

    By Minos Agricultural Machinery based in Gaziemir, TURKEY. from Mixer Feeder Product line

  • ELID - Electronic Identification Calve Feeder

    The ELID (Electronic Identification) feeder is a high quality machine designed for feeding a single group of calves up to a batch size of 30. Each calf has an ear tag fitted to identity the animal to the machine. The design and operation of the machine gives young animals a natural method of feeding.

    By TMF Milk Feeders based in Horsforth, UNITED KINGDOM. from Computerised Feeder Product line

  • Eco - Automatic Feeders

    Automatic feeders have proven themselves world-wide in the raising of lambs. They provide low-labour feeding and ensure the healthy growth of the animals. The Automatic Eco Lamb Feeder can feed up to 240 lambs, is easy to operate and provides low-labour feeding to help farmers rear strong, healthy lambs

    By Volac International Limited based in Hertfordshire, UNITED KINGDOM. from Agriculture- Feeders Product line

  • Conor - Vertical Feeders

    The Conor Vertical Feeder has been developed to incorporate the key qualities that accompany all Conor Machinery – strength, reliability and simplicity. Its robust simplistic design promotes a problem free lifespan and its design ensures a consistent mix which offers high nutritional value and improved yield. It is designed to handle all ...

    By Conor Engineering Ltd. based in Co. Clare, IRELAND. from Diet Feeders Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you