Only show results in Virginia? Ok

auger head Equipment

  • Palmieri - Auger Heads for Short Distance Drilling

    During the latest years, Palmieri has been very active in the Auger Machines field, as commonly used for horizontal drilling of small diameters for pipes and services installation. Such machines, usually mucking out by mean of screw conveyors, are extremely simple and easy to operate and assist: they are very versatile and particularly suitable ...

    By Palmieri S.p.A. based in Gaggio Montano (BO), ITALY. from Drilling Products Product line

  • Premium

    Model 05.02 - 2 m Depth Bi-Partite Root Auger Set

    By applying the bi-partite root auger almost undisturbed, uniform soil samples can be taken in layers of maximal 15 cm. The bi-partite root auger consists of a bottom part fitted with an exchangeable drilling-crown and a short unscrewable top part (handle) with a beating head.

    By Eijkelkamp Soil & Water based in Giesbeek, NETHERLANDS. from Augering & Soil Sampling Equipment Product line

  • Solid Augers

    Solid augers have a hex shank (pin) up and a hex socket (box) down. The standard length is 5' with other length sections available. All Mills Machine built solid augers have hard surface coating on the outer flighting edge. *Solid Auger diameters are designated by the hole diameter cut by the solid auger cutter head. The actual diameter of the ...

    By Mills Machine Company based in Shawnee, OKLAHOMA (USA). from Augers Product line

  • Model SS205 - Grain Auger

    Basic machine pulley driven  SØBY grain auger consists of  Motor console and auger head with outlet.  Extension of 1-2-2.5-3-4 or 5 metres with flanged join. Auger foot with protective grating / auger foot / long inlet.  Motor belt drive with taperlock dependent on motor size.

    By SØBY Maskinaktieselskab based in Højslev, DENMARK. from Augers Product line

  • Model SS254 - Grain Auger

    Basic machine gear motor  SØBY grain auger consists of:   Motor console and auger head with outlet.   Extension of 1-2-2.5-3-4 or 5 metres with flanged join.  Auger foot with protective grating / auger foot / long inlet

    By SØBY Maskinaktieselskab based in Højslev, DENMARK. from Augers Product line

  • Vertical Augers

    Dual Drive: Available in 6”, 8” and 10” with vertical force feed intake boot. Dual drive can be stepped up to next size vertical auger on 6” and 8” only. Single Drive - 6” and 8” only. Drive kit, belt shield and E-Z off motor mount is standard

    By Nebraska Engineering Company (NECO) based in Omaha, NEBRASKA (USA). from Discharge Heads/Augers Product line

  • Auger Front Attachment

    The post hole auger is perfect for a variety of tasks. Great for around the property or on the job. Auger attachment also comes in a wide array of sizes from 6″ to 36″ in diameter, giving you the flexibility to do the job you need done.

    By US Pride Products based in WISCONSIN (USA). from Power Head Attachments Product line

  • Uniflyte - Augers

    Uniflyte auger assemblies use the all new UltraFlyte auger flighting - the future of auger flighting - auger conveyor technology. Our auger assemblies are manufactured to OEM specifications for combine harvesters, forage harvesters, grain augers, mining, oil, drilling and much, much more.

    By Uniflyte Inc. based in Orion, ILLINOIS (USA).

  • Mackissic - Model EA93H - Auger

    The #1 auger of choice by rental centers and contractors worldwide. Once you use a counter-balanced Easy Auger® hydraulic earth dril, you'll never use anything else. Constructed with 1/4' thick steel frame, the Easy Auger® provides up to 350 foot pounds of torque for digging! Both the self-propelled and the non self-propelled models ...

    By Critchlow Enterprises, Inc. based in Allison Park, PENNSYLVANIA (USA). from Mackissic Augers Product line

  • Mackissic - Model EA93R - Augers

    The #1 auger of choice by rental centers and contractors worldwide. Once you use a counter-balanced Easy Auger® hydraulic earth dril, you'll never use anything else. Constructed with 1/4' thick steel frame, the Easy Auger® provides up to 350 foot pounds of torque for digging! Both the self-propelled and the non self-propelled models ...

    By Critchlow Enterprises, Inc. based in Allison Park, PENNSYLVANIA (USA). from Mackissic Augers Product line

  • Geringhoff - Model Harvest Star - Grain Head

    The Harvest Star* grain table sets the benchmark for grain tables folding technology. Its sophisticated coupling system is the result of focused development and reflects the cutting-edge technology applied throughout the entire head. The reel, cutterbar, auger, and transmission shaft couplings are fully automatic and self-tightening. Even in ...

    By Carl Geringhoff Vertriebsgesellschaft mbH & Co. KG based in Ahlen, GERMANY. from Grain Heads Product line

  • Utility Augers

    My-D Han-D utility augers come in handy on so many occasions: at bins, in the feedlot. around the dairy barn, at feedmills and elevators. Move them where they're needed or permanently install them in your storage or grain drying operation.The 4-inch model can easily be carried from location to location. Operates horizontally, or at any angle. Tube ...

    By My-D Han-D Mfg. Co. Inc. based in Dodge City, KANSAS (USA). from Augers & Hopper Product line

  • Meridian - Conventional Augers – Heavy Duty Grain Auger

    There’s nothing conventional about our Conventional augers. They’re constructed as durable, versatile pieces of equipment that can handle almost any situation. Its frame design allows for better weight distribution and increased stability while reliable, heavy-duty parts deliver unparalleled performance. In fact, when you compare these ...

    By Meridian Manufacturing Inc. based in Camrose, ALBERTA (CANADA). from Agriculture - Augers Product line

  • Portable Grain Augers

    The changes are so subtle, at first you might not notice them at all. But they're there: In a stronger undercarriage. In longer bearing life. Even in the way the auger is manufactured, using a precise welding process that cuts set up time by at least 50%. Take a look at our new specifications, then talk it over with your My-D HAN-D dealer. Because ...

    By My-D Han-D Mfg. Co. Inc. based in Dodge City, KANSAS (USA). from Augers & Hopper Product line

  • Calmer - Chopping Corn Head

    Calmer Corn Heads, by design, allow you to harvest faster and more economically than ever before, maximizing

    By Calmer Corn Heads, Inc. based in Lynn Center, ILLINOIS (USA). from Corn Heads Product line

  • Geringhoff - Model SunLite - Sunflower Head

    Harvesting is a challenging business during a season that leaves no room for that leaves no room for downtime or losses. Anyone striving to achieve commercial success in their farm operations depends on 100% reliable equipment - all day, every day. Listening to your needs in terms of technology and productivity, our harvesting specialists develop ...

    By Carl Geringhoff Vertriebsgesellschaft mbH & Co. KG based in Ahlen, GERMANY. from Sunflower Heads Product line

  • Model CH21 Series - Corn Head

    The CH21 Series Corn Head is ideal for large producers with 12-row planters. Its cross auger provides unmatched crop-handling capacity.

    By Haug Implement Co. based in Willmar, MINNESOTA (USA). from Harvest Equipment Product line

  • Planter Drill Head

    14'- 36' Planter Augers available. Planter augers are used on 'fixed' heads.

    By Power Trac based in Tazewell, VIRGINIA (USA). from Attachments Product line

  • Model F64 - Rotary Corn Head

    The only rotary corn head for pull-type forage harvester on the market. 2,25 m wide (90'), 3 rows of 30”. For tractors from 120 to 240 hp.

    By Dion-Ag Inc. based in Boisbriand, QUEBEC (CANADA). from Rotary Corn Head Product line

  • Brat - Rotary Auger

    12' tube mast. Cross head slide. Feed control system. Hydrostatic/planetary top head drive. Single station control console. Two-speed winches. Hydraulic outrigger system. Aluminum operator stands. Piston or centrifugal mud pump. Transfer cases from truck engine or diesel power unit. Retractable drill stem (auger) clamp/guide table with removable ...

    By Gus Pech Mfg. Co., Inc. based in Le Mars, IOWA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you