Refine by
Banana Plug Equipment & Supplies
13 equipment items found
Manufactured by:Pomona Electronics based inEverett, WASHINGTON (USA)
FEATURES: · Adapter converts Double Banana Jack Test Instruments to BNC Coaxial configuration for added shielding protection. · For test versatility, banana plugs can be vertically and horizontally stacked to the adapter. · Banana Plug springs feature Nickel Plated, Beryllium Copper for ...
Manufactured by:Pomona Electronics based inEverett, WASHINGTON (USA)
FEATURES: · Adapter converts Double Banana Jack Test Instruments to BNC Coaxial configuration for added shielding protection. · For test versatility, banana plugs can be vertically and horizontally stacked to the adapter. · Banana Plug features Nickel Plated, Beryllium Copper for tarnish ...
Manufactured by:GalvanoPlot, By Solar Biyoteknoloji, Ltd. based inIzmir, TURKEY
Signal Cable, 4 x 2 mm banana plug to 4 x 2 mm banana plug, 0,5 metre, non ...
Manufactured by:Controlweigh based inLong Grove, ILLINOIS (USA)
Output Ranges: 10 turn vernier 0 - 3mV/V. Excitation: 20v ac/dc max. Termination: Binding posts - accepts standard banana plug or up to No. 14 wire. Weight: .4Lbs. Dimensions: 4.5"H x 3.5"W x 2.2"D. Enclosure: ABS Thermoplastic Case. ...
Manufactured by:Permanent Magnets Limited based inThane, INDIA
Each probe is carefully calibrated with the calibration number shown on the probe. Probe is accurate for direct measurements from 10Hz to 3000Hz in Axial directions. Includes 2-prong banana plug. Axial directional - 20 millivolts peak per Gauss at 60 Hertz. ...
Manufactured by:XS Instruments - Giorgio Bormac S.r.l. based inCarpi MO, ITALY
Plastic body for general use. Gel-filled with porous diaphragm. Maintenance free. Fixed 1m cable with BNC + 4 mm banana plug. Dimensions (LxØ) mm 120x12 - pH 0 ... 14 - Temperature 0 ... 60 ° C. ...
Manufactured by:Controlweigh based inLong Grove, ILLINOIS (USA)
Impedance: 350 ohms nominal, Output Ranges: Fixed rotary switch 0 to 2 mv/v in 5 steps of .4 ...
Manufactured by:Controlweigh based inLong Grove, ILLINOIS (USA)
Impedance: 350 ohms nominal. Output Ranges: Fixed rotary switch: 0 to 3 mv/v in 15 steps of .2 mv/v. 10 turn vernier with locking graduated dial. OFF: Rotary selection + 0.0 mv/v. FINE: Rotary selection - 0.01 mv/v to +0.2 mv/v. MEDIUM: Rotary selection - 0.04 mv/v to +1.0 mv/v. COARSE: Rotary selection - 0.08 mv/v to +30 mv/v. Note: Vernier ranges may vary from ...
Manufactured by:Controlweigh based inLong Grove, ILLINOIS (USA)
Impedance: 350 ohms nominal. Output Ranges: Fixed rotary switch: 0 to 3 mv/v in 6 steps of .5 mv/v 10 turn vernier with locking graduated dial. OFF: Rotary selection + 0.0 mv/v. FINE: Rotary selection - 0.02 mv/v to +0.5 mv/v. MEDIUM: Rotary selection - 0.06 mv/v to +1.5 mv/v. COARSE: Rotary selection - 0.10 mv/v to +30 mv/v. Note: Vernier ranges may vary from above. ...
Manufactured by:Controlweigh based inLong Grove, ILLINOIS (USA)
Impedance: 350 ohms nominal. Output Ranges: Fixed rotary switch. 0 to 3 mv/v in 6 steps of .5 mv/v. Output Accuracy: Typically Max. + 0.008% + 0.020% of full scale. + 0.00024 mv/v + 0.00060 mv/v or +1 microvolt, whichever is greater. Zero Offset: Typically Max + 0.00009 mv/v + 0.0005 mv/v or +1 microvolt, whichever is ...
Manufactured by:Controlweigh based inLong Grove, ILLINOIS (USA)
Impedance: 350 ohms nominal. Output Ranges: Fixed rotary switch: 0 to 3 mv/v in 15 steps of .2 mv/v. Output Accuracy: Typically Max: + 0.008% + 0.020% of full scale + 0.00024 mv/v + 0.00060 mv/v or +1 microvolt, whichever is greater Zero Offset: Typically Max + 0.00009 mv/v + 0.0005 mv/v or +1 microvolt, whichever is ...
by:MCD Elektronik GmbH based inBirkenfeld, GERMANY
You simply activate the devices you really need. This gives you the benefit of saving electricity, protecting your hardware and your computer is not compromised in its performance. This USB hub 2.0 has eight downstream ports, which can be turned on and off individually via USB. When switching it off, the supply voltage (+5 V) and the data lines on the semiconductor switches are separated. The ...
Manufactured by:Haefely Test AG based inBasel, SWITZERLAND
The PCD 150 is used for surge coupling onto unshielded data- and signal lines according to IEC/EN standards. Damped oscillatory waves with both 100kHz and 1MHz up to 3.3kV peak as well as ring wave 100kHz with Z=200 Ohm up to 4.4kV peak can be coupled. Coupling and decoupling elements are included in one box because of the sensitive impulse shape. Manual coupling path switching for differential ...